Suspension Control Ecu Installation

Suspension. Land Cruiser. Urj200, 202 Grj200 Vdj200
Suspension Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL SUSPENSION CONTROL ECU

  2. INSTALL REAR SIDE NO. 2 AIR DUCT (w/ Heater)

  3. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  5. PERFORM VEHICLE HEIGHT OFFSET CALIBRATION

  6. PERFORM ZERO POINT CALIBRATION OF G SENSOR

  7. ADJUST HEADLIGHT ASSEMBLY

Suspension Control Ecu -- Installation



1. INSTALL SUSPENSION CONTROL ECU


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the wire harness clamp and connect the connector.

  1. Install the ECU with the 2 bolts.

    Torque:
    8.0 N*m{82 kgf*cm, 71 in.*lbf}


2. INSTALL REAR SIDE NO. 2 AIR DUCT (w/ Heater)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the duct with the 3 screws.

    Torque:
    5.4 N*m{55 kgf*cm, 48 in.*lbf}


3. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

  1. w/ Sliding Roof:
    (Click here)

  1. w/o Sliding Roof:
    (Click here)



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


5. PERFORM VEHICLE HEIGHT OFFSET CALIBRATION

  1. Perform the vehicle height offset calibration (Click here).



6. PERFORM ZERO POINT CALIBRATION OF G SENSOR

  1. Perform the zero point calibration of G sensor (Click here).



7. ADJUST HEADLIGHT ASSEMBLY

  1. for Halogen Headlight and LED Headlight:
    (Click here)