Height Control Sensor (For Front Side) Inspection

Suspension. Land Cruiser. Urj200, 202 Grj200 Vdj200
Suspension Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

Height Control Sensor (For Front Side) -- Inspection



1. INSPECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH



Land Cruiser. Urj200, 202 Grj200 Vdj200.Suspension Control.Suspension Control System.Height Control Sensor (For Front Side) Inspection

NOTICE:
Do not drop the height control sensor. If it is dropped, replace it with a new one.

  1. Connect 3 dry batteries of 1.5 V in series.

  1. Connect the positive (+) end of the batteries to terminal 3 (SHB) of the height control sensor and the negative (-) end of the batteries to terminal 1 (SHG). While slowly moving the sensor link up and down, measure the voltage between terminal 2 (SHFR*1, SHFL*2) and terminal 1 (SHG).

    HINT:
    *1: for RH
    *2: for LH

    1. Measure the voltage according to the value(s) in the table below.

      Standard Voltage:
      for RH
      Tester Connection
      		Condition
      		Specified Condition
      2 (SHFR) - 1 (SHG)
      		Max. HI
      		Approx. 4.1 V
      Normal
      		Approx. 2.25 V
      Min. LO
      		Approx. 0.45 V
      for LH
      Tester Connection
      		Condition
      		Specified Condition
      2 (SHFL) - 1 (SHG)
      		Max. HI
      		Approx. 4.1 V
      Normal
      		Approx. 2.25 V
      Min. LO
      		Approx. 0.45 V
      NOTICE:
      Do not apply a voltage of higher than 6 V.
      If the result is not as specified, replace the front height control sensor.