Active Height Control Pump And Motor Removal

Connect a hose to the bleeder plug for the height control accumulator and loosen the bleeder plug.

Discharge the suspension fluid pressure.

After the fluid pressure has dropped and oil has drained out, tighten the bleeder plug and remove the hose.

Torque:

6.9 N*m{70 kgf*cm, 61 in.*lbf}

Remove the clip.

Using a T30 "TORX" socket, remove the 7 screws and mudguard.

for Standard:
Remove the bumper cover (Click here).

w/ Towing Hitch:
Remove the bumper cover (Click here).

w/ Pintle Hook:
Remove the bumper cover (Click here).

for Double Swing Out Type:
Remove the bumper cover (Click here).

Remove the 2 screws, 2 grommets and protector.

Using a T30 "TORX" socket wrench, remove the 3 screws, grommet and pipe protector.

Using a union nut wrench, disconnect the No. 6 height control tube from the pump and motor.

Disconnect the tube clamp from the hose, then remove the 2 bolts and tube clamp.

Disconnect the 2 connectors and 3 clamps.

Remove the 3 bolts and pump and motor.