Fuel Tank Removal

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Ur-Fe Fuel. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. DISCHARGE FUEL SYSTEM PRESSURE

  2. REMOVE FUEL TANK CAP ASSEMBLY

  3. REMOVE NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY

  4. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Single Tank Type)

  5. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)

  6. DRAIN FUEL

  7. PRECAUTION

  8. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  9. REMOVE REAR NO. 1 SEAT ASSEMBLY RH (for 60/40 Split Seat Type 40 Side)

  10. REMOVE REAR NO. 1 SEAT ASSEMBLY LH (for 60/40 Split Seat Type 60 Side)

  11. REMOVE REAR NO. 2 SEAT ASSEMBLY

  12. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

  13. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

  14. REMOVE FRONT FLOOR CARPET ASSEMBLY

  15. REMOVE REAR FLOOR NO. 2 SERVICE HOLE COVER

  16. DISCONNECT NO. 2 FUEL TANK BREATHER TUBE (for Single Tank Type)

  17. DISCONNECT NO. 2 FUEL TANK BREATHER HOSE (for Double Tank Type)

  18. DISCONNECT FUEL TANK RETURN TUBE (for Single Tank Type)

  19. DISCONNECT FUEL TANK RETURN TUBE (for Double Tank Type)

  20. DISCONNECT NO. 1 FUEL EMISSION TUBE SUB-ASSEMBLY (for Double Tank Type)

  21. DISCONNECT FUEL HOSE (for Double Tank Type)

  22. DISCONNECT NO. 2 FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)

  23. DISCONNECT NO. 2 FUEL TANK BREATHER TUBE (for Double Tank Type)

  24. DISCONNECT FUEL TANK BREATHER TUBE (for Single Tank Type)

  25. DISCONNECT FUEL TANK BREATHER TUBE (for Double Tank Type)

  26. DISCONNECT FUEL TANK TO FILLER PIPE HOSE (for Single Tank Type)

  27. DISCONNECT FUEL TANK TO FILLER PIPE HOSE (for Double Tank Type)

  28. REMOVE FUEL TANK SUB-ASSEMBLY

  29. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY AND FUEL TANK RETURN TUBE SUB-ASSEMBLY (for Single Tank Type)

  30. REMOVE FUEL HOSE (for Double Tank Type)

  31. REMOVE FUEL TANK MAIN TUBE, FUEL TANK RETURN TUBE AND NO. 2 FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)

  32. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

  33. REMOVE FUEL TANK TO FILLER PIPE HOSE

  34. REMOVE NO. 1 FUEL TANK HEAT INSULATOR

Fuel Tank -- Removal



1. DISCHARGE FUEL SYSTEM PRESSURE
CAUTION:
  1. Do not disconnect any part of the fuel system until you have discharged the fuel system pressure.
  2. After discharging the fuel pressure, place a cloth or equivalent over fittings as you separate them to reduce the risk of fuel spray on yourself or in the engine compartment.

  1. Disconnect the fuel pump ECU connector (Click here).

  1. Start the engine. After the engine stops, turn the engine switch off.

    HINT:
    DTC P0171/0174 (system too lean) may be stored.

  1. Crank the engine again, and then check that the engine does not start.

  1. Loosen the fuel tank cap, and then discharge the pressure in the fuel tank completely.

  1. Disconnect the cable from the negative (-) battery terminal.

    NOTICE:
    1. After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
    2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  1. Connect the fuel pump ECU connector (Click here).



2. REMOVE FUEL TANK CAP ASSEMBLY


3. REMOVE NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 5 bolts and No. 1 fuel tank protector sub-assembly.



4. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Single Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. Detach the fuel tube clamp.

  1. Pull up the retainer and disconnect the fuel tank main tube sub-assembly.

    NOTICE:
    1. Check for foreign matter in the pipe and around the connector. Clean if necessary. Foreign matter may damage the O-ring or cause leaks in the seal between the pipe and connector.
    2. Do not use any tools to separate the pipe and connector.
    3. Do not forcefully bend or twist the nylon tube.
    4. Check for foreign matter on the pipe seal surface. Clean if necessary.
    5. Put the pipe and connector ends in plastic bags to prevent damage and foreign matter contamination.
    6. If the pipe and connector are stuck together, pinch the connector between your fingers and turn it carefully to disconnect it.
    Text in Illustration
    *1
    		Retainer
    *2
    		Pipe
    *3
    		Nylon Tube
    *4
    		Connector
    *5
    		O-Ring
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Pull Up


5. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)



Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal


Text in Illustration
*1
Retainer
*2
Pipe
*3
Nylon Tube
*4
Connector
*5
O-Ring
-
-
*a
except G.C.C. Countries
*b
for G.C.C. Countries
Land Cruiser. Urj200, 202 Grj200 Vdj200
Pull Up
-
-

  1. Detach the fuel tube clamp.

  1. Pull up the retainer and disconnect the fuel tank main tube sub-assembly.

    NOTICE:
    1. Check for foreign matter in the pipe and around the connector. Clean if necessary. Foreign matter may damage the O-ring or cause leaks in the seal between the pipe and connector.
    2. Do not use any tools to separate the pipe and connector.
    3. Do not forcefully bend or twist the nylon tube.
    4. Check for foreign matter on the pipe seal surface. Clean if necessary.
    5. Put the pipe and connector ends in plastic bags to prevent damage and foreign matter contamination.
    6. If the pipe and connector are stuck together, pinch the connector between your fingers and turn it carefully to disconnect it.


6. DRAIN FUEL

  1. Connect the cable to the negative (-) battery terminal.

  1. Connect the GTS to the DLC3.

  1. Turn the engine switch on (IG).

    NOTICE:
    Do not start the engine.

  1. Turn the GTS on.



  1. Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump / Speed.

    CAUTION:
    1. Do not smoke or be near an open flame when working on the fuel system.
    2. Secure good ventilation.
    3. Keep gasoline away from rubber or leather parts.

    HINT:
    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal
    If the fuel pump does not operate, remove the tube joint clip and disconnect the fuel tank return tube sub-assembly, and drain fuel from the port shown in the illustration.
    Text in Illustration
    *a
    		for Single Tank Type
    *b
    		for Double Tank Type
    *c
    		Port

  1. Disconnect the cable from the negative (-) battery terminal.

    NOTICE:
    1. After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
    2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. Disconnect the fuel pump and fuel sender gauge connector.

    Text in Illustration
    *a
    		for Single Tank Type
    *b
    		for Double Tank Type


7. PRECAUTION
NOTICE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


8. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


9. REMOVE REAR NO. 1 SEAT ASSEMBLY RH (for 60/40 Split Seat Type 40 Side)
(Click here)


10. REMOVE REAR NO. 1 SEAT ASSEMBLY LH (for 60/40 Split Seat Type 60 Side)
(Click here)


11. REMOVE REAR NO. 2 SEAT ASSEMBLY
  1. for Face to Face Seat Type (Click here)
  2. except Face to Face Seat Type (Click here)


12. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH
  1. w/ Sliding Roof (Click here)
  2. w/o Sliding Roof (Click here)


13. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH
  1. w/ Sliding Roof (Click here)
  2. w/o Sliding Roof (Click here)


14. REMOVE FRONT FLOOR CARPET ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Turn over the floor carpet.

    HINT:
    Fold back the floor carpet so that the air duct can be removed.


15. REMOVE REAR FLOOR NO. 2 SERVICE HOLE COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear Air Conditioning System:
    Remove the 2 screws and air duct.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the rear floor No. 2 service hole cover.



16. DISCONNECT NO. 2 FUEL TANK BREATHER TUBE (for Single Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. Detach the fuel tube clamp.

  1. Pull up the retainer and disconnect the No. 2 fuel tank breather tube.

    NOTICE:
    1. Check for foreign matter in the pipe and around the connector. Clean if necessary. Foreign matter may damage the O-ring or cause leaks in the seal between the pipe and connector.
    2. Do not use any tools to separate the pipe and connector.
    3. Do not forcefully bend or twist the nylon tube.
    4. Check for foreign matter on the pipe seal surface. Clean if necessary.
    5. Put the pipe and connector ends in plastic bags to prevent damage and foreign matter contamination.
    6. If the pipe and connector are stuck together, pinch the connector between your fingers and turn it carefully to disconnect it.
    Text in Illustration
    *1
    		Retainer
    *2
    		Pipe
    *3
    		Nylon Tube
    *4
    		Connector
    *5
    		O-Ring
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Pull Up


17. DISCONNECT NO. 2 FUEL TANK BREATHER HOSE (for Double Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. for G.C.C. Countries:

    1. Detach the fuel tube clamp.

    2. Slide the clip and disconnect the No. 2 fuel tank breather hose from the pipe.



18. DISCONNECT FUEL TANK RETURN TUBE (for Single Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. Detach the fuel tube clamp.

  1. Pull up the retainer and disconnect the fuel tank return tube.

    NOTICE:
    1. Check for foreign matter in the pipe and around the connector. Clean if necessary. Foreign matter may damage the O-ring or cause leaks in the seal between the pipe and connector.
    2. Do not use any tools to separate the pipe and connector.
    3. Do not forcefully bend or twist the nylon tube.
    4. Check for foreign matter on the pipe seal surface. Clean if necessary.
    5. Put the pipe and connector ends in plastic bags to prevent damage and foreign matter contamination.
    6. If the pipe and connector are stuck together, pinch the connector between your fingers and turn it carefully to disconnect it.
    Text in Illustration
    *1
    		Retainer
    *2
    		Pipe
    *3
    		Nylon Tube
    *4
    		Connector
    *5
    		O-Ring
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Pull Up


19. DISCONNECT FUEL TANK RETURN TUBE (for Double Tank Type)



Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal


Text in Illustration
*1
Retainer
*2
Pipe
*3
Nylon Tube
*4
Connector
*5
O-Ring
-
-
*a
except G.C.C. Countries
*b
for G.C.C. Countries
Land Cruiser. Urj200, 202 Grj200 Vdj200
Pull Up
-
-

  1. Detach the fuel tube clamp.

  1. Pull up the retainer and disconnect the fuel tank return tube.

    NOTICE:
    1. Check for foreign matter in the pipe and around the connector. Clean if necessary. Foreign matter may damage the O-ring or cause leaks in the seal between the pipe and connector.
    2. Do not use any tools to separate the pipe and connector.
    3. Do not forcefully bend or twist the nylon tube.
    4. Check for foreign matter on the pipe seal surface. Clean if necessary.
    5. Put the pipe and connector ends in plastic bags to prevent damage and foreign matter contamination.
    6. If the pipe and connector are stuck together, pinch the connector between your fingers and turn it carefully to disconnect it.


20. DISCONNECT NO. 1 FUEL EMISSION TUBE SUB-ASSEMBLY (for Double Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. for G.C.C. Countries:

    1. Detach the fuel tube clamp.

    2. Pull up the retainer and disconnect the No. 1 fuel emission tube sub-assembly.

      NOTICE:
      1. Check for foreign matter in the pipe and around the connector. Clean if necessary. Foreign matter may damage the O-ring or cause leaks in the seal between the pipe and connector.
      2. Do not use any tools to separate the pipe and connector.
      3. Do not forcefully bend or twist the nylon tube.
      4. Check for foreign matter on the pipe seal surface. Clean if necessary.
      5. Put the pipe and connector ends in plastic bags to prevent damage and foreign matter contamination.
      6. If the pipe and connector are stuck together, pinch the connector between your fingers and turn it carefully to disconnect it.
      Text in Illustration
      *1
      		Retainer
      *2
      		Pipe
      *3
      		Nylon Tube
      *4
      		Connector
      *5
      		O-Ring
      Land Cruiser. Urj200, 202 Grj200 Vdj200
      		Pull Up


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. except G.C.C. Countries:

    1. Detach the fuel tube clamp.

    2. Pull the retainer up while pinching it on both sides by hand as shown in the illustration, and disconnect the No. 1 fuel emission tube sub-assembly.

      NOTICE:
      1. Check for foreign matter in the pipe and around the connector. Clean if necessary. Foreign matter may damage the O-ring or cause leaks in the seal between the pipe and connector.
      2. Do not use any tools to separate the pipe and connector.
      3. Do not forcefully bend or twist the nylon tube.
      4. Check for foreign matter on the pipe seal surface. Clean if necessary.
      5. Put the pipe and connector ends in plastic bags to prevent damage and foreign matter contamination.
      6. If the pipe and connector are stuck together, pinch the connector between your fingers and turn it carefully to disconnect it.
      Text in Illustration
      *1
      		Retainer
      *2
      		Connector
      *3
      		O-Ring
      *4
      		Pipe
      *5
      		Nylon Tube
      Land Cruiser. Urj200, 202 Grj200 Vdj200
      		Push
      Land Cruiser. Urj200, 202 Grj200 Vdj200
      		Pull Up


21. DISCONNECT FUEL HOSE (for Double Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. for G.C.C. Countries:

    1. Detach the fuel tube clamp.

    2. Slide the clip and disconnect the fuel hose from the pipe.



22. DISCONNECT NO. 2 FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)



Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal


Text in Illustration
*1
Retainer
*2
Connector
*3
O-Ring
*4
Pipe
*5
Nylon Tube
-
-
*a
except G.C.C. Countries
*b
for G.C.C. Countries
Land Cruiser. Urj200, 202 Grj200 Vdj200
Pull Up
-
-

  1. Detach the fuel tube clamp.

  1. Pull up the retainer and disconnect the No. 2 fuel tank main tube sub-assembly.

    NOTICE:
    1. Check for foreign matter in the pipe and around the connector. Clean if necessary. Foreign matter may damage the O-ring or cause leaks in the seal between the pipe and connector.
    2. Do not use any tools to separate the pipe and connector.
    3. Do not forcefully bend or twist the nylon tube.
    4. Check for foreign matter on the pipe seal surface. Clean if necessary.
    5. Put the pipe and connector ends in plastic bags to prevent damage and foreign matter contamination.
    6. If the pipe and connector are stuck together, pinch the connector between your fingers and turn it carefully to disconnect it.


23. DISCONNECT NO. 2 FUEL TANK BREATHER TUBE (for Double Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. except G.C.C. Countries:

    1. Detach the fuel tube clamp.

    2. Pull up the retainer and disconnect the No. 2 fuel tank breather tube.

      NOTICE:
      1. Check for foreign matter in the pipe and around the connector. Clean if necessary. Foreign matter may damage the O-ring or cause leaks in the seal between the pipe and connector.
      2. Do not use any tools to separate the pipe and connector.
      3. Do not forcefully bend or twist the nylon tube.
      4. Check for foreign matter on the pipe seal surface. Clean if necessary.
      5. Put the pipe and connector ends in plastic bags to prevent damage and foreign matter contamination.
      6. If the pipe and connector are stuck together, pinch the connector between your fingers and turn it carefully to disconnect it.
      Text in Illustration
      *1
      		Retainer
      *2
      		Connector
      *3
      		O-Ring
      *4
      		Pipe
      *5
      		Nylon Tube
      Land Cruiser. Urj200, 202 Grj200 Vdj200
      		Pull Up


24. DISCONNECT FUEL TANK BREATHER TUBE (for Single Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. Detach the fuel tube clamp.

  1. Pull up the retainer and disconnect the fuel tank breather tube from the fuel tank to filler pipe sub-assembly.

    NOTICE:
    1. Do not use any tools in this procedure.
    2. Check for any dirt and foreign matter contamination in the pipe and around the connector. Clean if necessary. Foreign matter may damage the O-ring or cause leaks in the seal between the pipe and connector.
    Text in Illustration
    *1
    		Retainer
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Pull Up


25. DISCONNECT FUEL TANK BREATHER TUBE (for Double Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. Detach the fuel tube clamp.

  1. Pull up the retainer and disconnect the fuel tank breather tube from the fuel tank to filler pipe sub-assembly.

    NOTICE:
    1. Do not use any tools in this procedure.
    2. Check for any dirt and foreign matter contamination in the pipe and around the connector. Clean if necessary. Foreign matter may damage the O-ring or cause leaks in the seal between the pipe and connector.
    Text in Illustration
    *1
    		Retainer
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Pull Up


26. DISCONNECT FUEL TANK TO FILLER PIPE HOSE (for Single Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Loosen the hose clamp and disconnect the fuel tank to filler pipe hose from the fuel tank to filler pipe sub-assembly.



27. DISCONNECT FUEL TANK TO FILLER PIPE HOSE (for Double Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Loosen the hose clamp and disconnect the fuel tank to filler pipe hose from the fuel tank to filler pipe sub-assembly.



28. REMOVE FUEL TANK SUB-ASSEMBLY

  1. Place an engine lifter under the fuel tank sub-assembly.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 bolts, 2 clips, 2 pins and 2 fuel tank band sub-assemblies.

  1. Slowly lower the engine lifter slightly.



29. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY AND FUEL TANK RETURN TUBE SUB-ASSEMBLY (for Single Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. Remove the 2 tube joint clips and pull out the 2 fuel tube joints.

    NOTICE:
    1. Remove any dirt and foreign matter on the fuel tube joint before performing this work.
    2. Do not allow any scratches or foreign matter on the parts when disconnecting them, as the fuel tube joint contains the O-rings that seal the plug.
    3. Perform this work by hand. Do not use any tools.
    4. Do not forcibly bend, twist or turn the nylon tube.
    5. Protect the disconnected part by covering it with a plastic bag and tape after disconnecting the fuel tubes.
    Text in Illustration
    *1
    		Fuel Tube Joint
    *2
    		Tube Joint Clip
    *3
    		O-Ring
    *4
    		Fuel Suction Plate Sub-assembly


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. Detach the clamp and remove the fuel tank main tube sub-assembly.

    Text in Illustration
    *1
    		Fuel Tank Main Tube Sub-assembly
    *2
    		Fuel Tank Return Tube Sub-assembly

  1. Detach the clamp and remove the fuel tank return tube sub-assembly.



30. REMOVE FUEL HOSE (for Double Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. for G.C.C. Countries:
    Slide the clip and remove the fuel hose from the fuel suction tube sub-assembly.



31. REMOVE FUEL TANK MAIN TUBE, FUEL TANK RETURN TUBE AND NO. 2 FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. Remove the 3 tube joint clips and pull out the 3 fuel tube joints.

    NOTICE:
    1. Remove any dirt and foreign matter on the fuel tube joint before performing this work.
    2. Do not allow any scratches or foreign matter on the parts when disconnecting them, as the fuel tube joint contains the O-rings that seal the plug.
    3. Perform this work by hand. Do not use any tools.
    4. Do not forcibly bend, twist or turn the nylon tube.
    5. Protect the disconnected part by covering it with a plastic bag and tape after disconnecting the fuel tubes.
    Text in Illustration
    *1
    		Fuel Tube Joint
    *2
    		Tube Joint Clip
    *3
    		O-Ring
    *4
    		Fuel Suction Plate Sub-assembly


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. except G.C.C. Countries:

    1. Detach the clamp and remove the fuel tank main tube sub-assembly.

      Text in Illustration
      *1
      		Fuel Tank Main Tube Sub-assembly
      *2
      		Fuel Tank Return Tube Sub-assembly
      *3
      		No. 2 Fuel Tank Main Tube Sub-assembly

    2. Detach the clamp and remove the fuel tank return tube sub-assembly.

    3. Detach the 2 clamps and remove the No. 2 fuel tank main tube sub-assembly.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. for G.C.C. Countries:

    1. Detach the clamp and remove the fuel tank main tube sub-assembly.

      Text in Illustration
      *1
      		Fuel Tank Main Tube Sub-assembly
      *2
      		Fuel Tank Return Tube Sub-assembly
      *3
      		No. 2 Fuel Tank Main Tube Sub-assembly

    2. Detach the clamp and remove the fuel tank return tube sub-assembly.

    3. Detach the 2 clamps and remove the No. 2 fuel tank main tube sub-assembly.



32. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. Set SST on the fuel pump gauge retainer.

    SST
    09808-14030
    HINT:
    1. Engage the claws of SST securely with the fuel pump gauge retainer holes to secure SST.
    2. Install SST while pressing the claws of SST against the fuel pump gauge retainer (towards the center of SST).


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. Using SST, loosen the fuel pump gauge retainer.

    SST
    09808-14030
    Text in Illustration
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Turn
    NOTICE:
    1. When the fuel pump gauge retainer is loosened, be careful as the pump and gauge tube will spring upward from the force of the spring.
    2. Remove foreign matter around the fuel suction with pump and gauge before this operation.
    HINT:
    Fit the tips of SST onto the ribs of the fuel pump gauge retainer.

  1. Remove the fuel pump gauge retainer.

  1. Remove the fuel suction with pump and gauge tube assembly from the fuel tank.

    NOTICE:
    Be careful not to bend the arm of the fuel sender gauge.

  1. Remove the gasket from the fuel tank.



33. REMOVE FUEL TANK TO FILLER PIPE HOSE


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Loosen the hose clamp and remove the fuel tank to filler pipe hose from the fuel tank sub-assembly.



34. REMOVE NO. 1 FUEL TANK HEAT INSULATOR


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Fuel.Fuel System.Fuel Tank Removal

  1. Remove the fuel tube clamp from the No. 1 fuel tank heat insulator.

    Text in Illustration
    *a
    		for G.C.C. Countries

  1. Using needle-nose pliers, remove the 4 clips shown in the illustration, and then remove the No. 1 fuel tank heat insulator.