Air Conditioning Amplifier Installation

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Heating Air Conditioning. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY

  2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

  3. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)

  5. INSTALL LOWER INSTRUMENT PANEL (w/o Passenger Side Knee Airbag)

  6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

  7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

  8. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

  9. INSTALL FRONT DOOR SCUFF PLATE RH

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Passenger Side Knee Airbag)

  11. CHECK SRS WARNING LIGHT (w/ Passenger Side Knee Airbag)

Air Conditioning Amplifier -- Installation


HINT:
  1. Use the same procedures for the LHD vehicle and RHD vehicle.
  2. The procedures listed below are for the LHD vehicle.


1. INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Install the amplifier with the screw.

  1. Connect the connector.



2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Connect the connector.

  1. Attach the 3 claws to install the lower No. 2 instrument panel finish panel.

  1. Install the 4 bolts.



3. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Attach the 6 claws to install the No. 3 instrument cluster finish panel garnish.



4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Air Conditioning Amplifier  Installation
  1. Connect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.
  1. Attach the 4 claws to install the front passenger side knee airbag.

  1. Install the 4 bolts.

    Torque:
    10 N*m{102 kgf*cm, 7 ft.*lbf}


5. INSTALL LOWER INSTRUMENT PANEL (w/o Passenger Side Knee Airbag)


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Attach the 4 claws to install the lower instrument panel.

  1. Install the 2 bolts.



6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Attach the 4 claws to install the No. 2 instrument panel under cover.



7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Attach the 7 claws to install the lower instrument panel pad sub-assembly.

  1. Install the clip and screw.



8. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION


Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.



9. INSTALL FRONT DOOR SCUFF PLATE RH
  1. w/ Sliding Roof:
    (Click here)

  1. w/o Sliding Roof:
    (Click here)



10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Passenger Side Knee Airbag)
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


11. CHECK SRS WARNING LIGHT (w/ Passenger Side Knee Airbag)
(Click here)