Rear Door Lock Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Door Lock. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE REAR DOOR ARMREST BASE PANEL ASSEMBLY LH

  4. REMOVE REAR DOOR INSIDE HANDLE BEZEL LH

  5. REMOVE ASSIST GRIP COVER LH

  6. REMOVE COURTESY LIGHT ASSEMBLY (w/ Courtesy Light)

  7. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

  8. REMOVE REAR DOOR SERVICE HOLE COVER LH

  9. REMOVE REAR DOOR LOCK ASSEMBLY LH

  10. REMOVE REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY LH

  11. REMOVE REAR DOOR INSIDE LOCKING CABLE ASSEMBLY LH

Rear Door Lock -- Removal


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE REAR DOOR ARMREST BASE PANEL ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a moulding remover, detach the 7 claws.

  1. Disconnect the connector and remove the rear door upper armrest base panel assembly LH.



4. REMOVE REAR DOOR INSIDE HANDLE BEZEL LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 4 claws and remove the rear door inside handle bezel LH.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Protective Tape


5. REMOVE ASSIST GRIP COVER LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a moulding remover, detach the 9 claws and remove the assist grip cover LH.



6. REMOVE COURTESY LIGHT ASSEMBLY (w/ Courtesy Light)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the claw.

  1. Remove the courtesy light and then disconnect the connector.



7. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Lock.Power Door Lock Control System.Rear Door Lock Removal

  1. Remove the 3 screws.

  1. Remove the 9 clips.

  1. Remove the rear inner door glass weatherstrip LH together with the rear door trim board sub-assembly LH by pulling them upward in the order shown in the illustration.

    HINT:
    Make sure that the pin labeled A in the illustration is detached from the door panel.

  1. Disconnect the connector and remove the rear door trim board sub-assembly LH.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the 2 cables from the rear door inside handle sub-assembly LH.



8. REMOVE REAR DOOR SERVICE HOLE COVER LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a clip remover, detach the 7clamps.

  1. Remove the bolt and disconnect the 3connectors.

  1. Remove the rear door service hole cover LH.

    HINT:
    Remove the remaining tape on the door.


9. REMOVE REAR DOOR LOCK ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a T30 ''TORX'' socket, remove the 3 screws and door lock.

    NOTICE:
    Be careful when removing the screws as the door lock may fall and become damaged.


10. REMOVE REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the claw.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Protective Tape


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the rear door lock remote control cable assembly LH.



11. REMOVE REAR DOOR INSIDE LOCKING CABLE ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 3 claws.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Protective Tape


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Lock.Power Door Lock Control System.Rear Door Lock Removal

  1. Remove the rear door inside locking cable assembly LH.

    Text in Illustration
    *A
    		w/o Double Lock
    *B
    		w/ Double Lock