Rear No. 2 Seat Inner Belt Assembly -- Installation |
| 1. INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY |
Install the 2 belts.
- NOTICE:
- Make sure the claws are facing away from the seat.
- Do not overlap the anchor part of the seat belt and protruding parts of the seat.
| 2. INSTALL REAR SEAT INNER BELT SUB-ASSEMBLY (for LH Side) |
 |
Install the belt with the nut.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding parts of the seat.
- HINT:
- The rear No. 2 seat inner belt is fixed with the same nut as the rear seat inner belt. Therefore, connect it when installing the rear seat inner belt.
| 3. INSTALL REAR SEAT OUTER BELT SUB-ASSEMBLY (for RH Side) |
 |
Install the belt with the nut.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding parts of the seat.
- HINT:
- The rear No. 2 seat inner belt is fixed with the same nut as the rear seat outer belt. Therefore, connect it when installing the rear seat outer belt.
| 4. INSTALL NO. 3 SEAT LEG COVER NO. 2 |
 |
Attach the 4 claws to install the cover.
Install the 2 screws.
| 5. INSTALL NO. 3 SEAT FRONT BRACKET COVER LH |
 |
Attach the 4 claws to install the cover.
| 6. INSTALL REAR SEAT CUSHION UNDER COVER LH |
Install the cover with the 7 screws.
 |
Attach the 16 claws.
 |
| 7. INSTALL 3RD SEAT LINK SUB-ASSEMBLY LH |
 |
Install the seat link with the bolt and nut.
- Torque:
- 8.5 N*m{87 kgf*cm, 75 in.*lbf}
| 8. INSTALL NO. 2 SEAT LEG COVER NO. 2 |
 |
Install the seat leg cover with the screw.
| 9. INSTALL REAR NO. 3 SEAT LEG COVER LH |
Install the seat leg cover with the 2 screws.
 |
Install the spring of the seat stay ball-joint.
 |
Connect the seat stay to the seat frame.
| 10. INSTALL REAR SEAT REAR BRACKET COVER REAR |
Attach the 2 claws to install the cover.
| 11. INSTALL RECLINING ADJUSTER COVER RH |
 |
Attach the 5 claws in the order shown in the illustration to install the cover.
Install the screw.
| 12. INSTALL RECLINING ADJUSTER COVER LH |
 |
Attach the 3 claws in the order shown in the illustration to install the cover.
Install the screw.
| 13. INSTALL NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH |
 |
Install the release handle with the screw.
| 14. INSTALL SEAT ADJUSTER BOLT COVER |
 |
Attach the 2 claws to install the cover.
| 15. INSTALL REAR NO. 2 SEAT ASSEMBLY (for LH Side) |
Install the rear No. 2 seat assembly (Click here).