Climate Control Seat Switch Installation

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Seat. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL SEAT HEATER SWITCH

  2. INSTALL SUSPENSION CONTROL SWITCH

  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

  4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY

  5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

  6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

  8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

  9. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

  10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

  11. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

  12. INSPECT SEAT HEATER SYSTEM

  13. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

Climate Control Seat Switch -- Installation


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL SEAT HEATER SWITCH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the seat heater switch.



2. INSTALL SUSPENSION CONTROL SWITCH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 claws to install the suspension control switch.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the 2 connectors.

  1. Attach the wire harness clamp.



3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the connectors.

  1. Attach the 14 claws to install the console panel.



4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 claws to install the box.



5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 9 claws to install the panel.



6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the connectors.

  1. Attach the 7 claws to install the panel.



7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


  1. Install the shift lever knob and twist it in the direction indicated by the arrow.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Climate Control Seat Switch Installation



8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 7 claws to install the panel pad.

  1. Install the screw.

  1. Install the clip.



9. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 7 claws to install the panel cushion.



10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the connectors and 2 clamps.

  1. Attach the 8 claws to install the panel pad.

  1. Install the screw.

  1. Install the clip.



11. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 7 claws to install the panel cushion.



12. INSPECT SEAT HEATER SYSTEM

  1. Check the seat heater operation.

    1. Turn the engine switch on (IG).

    2. Turn the seat heater switch on.

    3. Wait 5 minutes or more and confirm that the seat surface becomes warm.



13. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

  1. Check the climate control seat operation.

    1. When the climate control seat switch is turned on, check that the seat heater and blower operate based on the seat temperature.

    2. If the seat temperature increases as a result of the seat heater operation, check that the seat heater operation stops and the blower operation continues.

      HINT:
      Based on the cabin temperature, seat temperature, etc., the seat heater operation time varies.