Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Seat. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER

  4. REMOVE REAR NO. 4 SEAT CUSHION HINGE COVER

  5. REMOVE REAR NO. 1 SEAT CUSHION HINGE COVER

  6. REMOVE REAR NO. 3 SEAT CUSHION HINGE COVER

  7. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

  8. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

  9. REMOVE REAR NO. 1 SEAT PROTECTOR

  10. REMOVE REAR NO. 2 SEAT PROTECTOR

  11. REMOVE REAR STEP COVER

  12. REMOVE REAR DOOR SCUFF PLATE LH

  13. REMOVE REAR DOOR SCUFF PLATE RH

  14. REMOVE REAR NO. 2 SEAT ASSEMBLY

  15. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

  16. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  17. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

  18. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

  19. REMOVE AIR DUCT PLUG (w/ Rear Air Conditioning System)

  20. REMOVE REAR AIR DUCT GUIDE (w/ Rear Air Conditioning System)

  21. REMOVE FRONT FLOOR CARPET ASSEMBLY

  22. REMOVE REAR NO. 6 AIR DUCT (w/ Rear Air Conditioning System)

  23. REMOVE REAR SEAT CUSHION LOCK STRIKER SUB-ASSEMBLY

Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) -- Removal


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 6 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


4. REMOVE REAR NO. 4 SEAT CUSHION HINGE COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 7 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


5. REMOVE REAR NO. 1 SEAT CUSHION HINGE COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Operate the reclining adjuster release handle to move the seat into the position shown in the illustration.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 2 claws and 2 clips, and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


6. REMOVE REAR NO. 3 SEAT CUSHION HINGE COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 2 claws and 2 clips, and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


7. REMOVE REAR NO. 1 SEAT ASSEMBLY RH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear Seat Side Airbag:
    Disconnect the connector.

  1. w/ Seat Heater System:
    Disconnect the connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 4 bolts and seat assembly.

    NOTICE:
    Be careful not to damage the vehicle body.


8. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

  1. Remove the rear No. 1 seat assembly LH (Click here).



9. REMOVE REAR NO. 1 SEAT PROTECTOR


Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) Removal

  1. Detach the 10 claws and remove the 2 seat protectors.



10. REMOVE REAR NO. 2 SEAT PROTECTOR


Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) Removal

  1. Detach the 10 claws and remove the 2 seat protectors.



11. REMOVE REAR STEP COVER
HINT:
Use the same procedure for both rear step covers.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the rear step cover.



12. REMOVE REAR DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the screw.

  1. Detach the 3 claws and 4 clips, and remove the rear door scuff plate LH.



13. REMOVE REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


14. REMOVE REAR NO. 2 SEAT ASSEMBLY

  1. for Face to Face Seat Type:
    Remove the rear No. 2 seat assembly (Click here).

  1. except Face to Face Seat Type:
    Remove the rear No. 2 seat assembly (Click here).



15. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 6 clips and remove the rear floor mat support plate.



16. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedure for both No. 1 luggage compartment trim hooks.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) Removal

  1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *a
    		Protective Tape


17. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

  1. w/ Sliding Roof:
    Remove the front quarter trim panel assembly LH (Click here).

  1. w/o Sliding Roof:
    Remove the front quarter trim panel assembly LH (Click here).



18. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

  1. w/ Sliding Roof:
    Remove the front quarter trim panel assembly RH (Click here).

  1. w/o Sliding Roof:
    Remove the front quarter trim panel assembly RH (Click here).



19. REMOVE AIR DUCT PLUG (w/ Rear Air Conditioning System)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the plug.

    HINT:
    Use the same procedures for both sides.


20. REMOVE REAR AIR DUCT GUIDE (w/ Rear Air Conditioning System)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the screw.

  1. Detach the claw and remove the guide.

    HINT:
    Use the same procedures for both sides.


21. REMOVE FRONT FLOOR CARPET ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Fold back the floor carpet.

    HINT:
    Fold back the carpet until it is possible to remove the rear No. 6 air duct.


22. REMOVE REAR NO. 6 AIR DUCT (w/ Rear Air Conditioning System)

  1. Disconnect the 2 connectors.



  1. Remove the 5 screws and duct.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) Removal



23. REMOVE REAR SEAT CUSHION LOCK STRIKER SUB-ASSEMBLY


  1. Remove the 10 bolts and 4 lock strikers.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Rear No. 1 Seat Assembly (For 60/40 Split Seat Type 40 Side) Removal