REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System)
REMOVE SEAT CLIMATE CONTROL CONTROLLER LH (w/ Climate Control Seat System, for Seatback)
REMOVE FRONT SEPARATE TYPE SEATBACK COVER (w/ Climate Control Seat System)
REMOVE FRONT SEATBACK HEATER ASSEMBLY LH (w/ Seat Heater System)
REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (for Driver Side)
REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)
REMOVE SEAT CLIMATE CONTROL ECU (w/ Climate Control Seat System)
REMOVE SEAT CLIMATE CONTROL CONTROLLER LH (w/ Climate Control Seat System, for Seat Cushion)
REMOVE SEAT CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)
REMOVE SEAT FRAME SET BRACKET SUB-ASSEMBLY (w/ Climate Control Seat System)
Front Seat Assembly (For Power Seat) -- Disassembly |
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
 |
Apply protective tape as shown in the illustration.
Text in Illustration *1 Protective Tape
Using a screwdriver, detach the 2 claws and remove the slide and vertical power seat switch knob.
- HINT:
- Tape the screwdriver tip before use.
| 2. REMOVE RECLINING POWER SEAT SWITCH KNOB |
 |
Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.
Text in Illustration *1 Protective Tape - HINT:
- Tape the screwdriver tip before use.
| 3. REMOVE FRONT SEAT CUSHION SHIELD LH |
 |
Remove the 2 screws.
Disconnect the 2 rubber bands.
Remove the 3 screws.
 |
Detach the 2 claws and remove the front seat cushion shield LH together with the front inner No. 1 seat cushion shield LH.
for Driver Side:
Disconnect the connector.
| 4. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD LH |
 |
Remove the screw.
Detach the claw and remove the front inner No. 1 seat cushion shield LH from the front seat cushion shield LH.
| 5. REMOVE LUMBAR SWITCH (for Driver Side) |
 |
Remove the 2 screws and lumbar switch from the front seat cushion shield LH.
| 6. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH |
Disconnect the connectors and detach the clamps.
Remove the nut and front seat inner belt assembly.
 |
Remove the front seat belt anchor plate.
| 7. REMOVE FRONT INNER SEAT CUSHION SHIELD LH |
 |
Remove the screw.
Detach the 2 claws and clip, and then remove the front inner seat cushion shield LH.
| 8. REMOVE FRONT POWER SEAT SWITCH LH |
w/ Seat Position Memory System:
Disconnect the 2 connectors.
w/o Seat Position Memory System:
Disconnect the connector.
Remove the 3 screws and front power seat switch LH.
 |
| 9. REMOVE SEAT CUSHION COVER WITH PAD |
Using a clip remover, remove the 2 clips.
 |
w/o Climate Control Seat System:
Disconnect the connector and detach the 2 wire harness clamps.
Disconnect the connector and detach the wire harness clamp.
w/ Climate Control Seat System:
Disconnect the 2 connectors and detach the 4 wire harness clamps.
Detach the wire harness clamp.
for Front Passenger Side:
Disconnect the connector.
Detach the 2 clamps and remove the connector holder.
Bend the 2 seat frame claws upward.
 |
Detach the hooks and remove the seat cushion cover with pad.
| 10. REMOVE FRONT SEPARATE TYPE SEAT CUSHION COVER |
Remove the hog rings and front separate type seat cushion cover from the front separate type seat cushion pad.
 |
| 11. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System) |
w/o Climate Control Seat System:
Cut off the tack pins and remove the front seat cushion heater assembly LH from the front separate type seat cushion cover.
 |
w/ Climate Control Seat System:
Cut off the tack pins and remove the front seat cushion heater assembly LH from the front separate type seat cushion cover.
 |
| 12. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH |
 |
Remove the 2 screws.
Move the front seatback board sub-assembly LH in the direction of the arrow to detach the 2 hooks and remove it.
| 13. REMOVE SEAT CLIMATE CONTROL CONTROLLER LH (w/ Climate Control Seat System, for Seatback) |
 |
Detach the 2 claws and disconnect the seat climate control blower LH.
Detach the 4 hooks and remove the seat climate control controller LH.
| 14. REMOVE FRONT SEAT HEADREST SUPPORT |
 |
Detach the 4 claws and remove the 2 front seat headrest supports.
| 15. REMOVE SEATBACK COVER WITH PAD |
Remove the hog rings.
Text in Illustration *1 Hog Ring
 |
Remove the nut and detach the seatback cover bracket.
Text in Illustration *1 Seatback Cover Bracket
 |
Detach the hooks and remove the seatback cover with pad.
| 16. REMOVE FRONT SEPARATE TYPE SEATBACK COVER |
Pass the seatback cover bracket through the hole of the front separate type seatback pad.
Text in Illustration *1 Seatback Cover Bracket
 |
Remove the hog rings.
 |
Detach the fastening tape and remove the front separate type seatback cover from the front separate type seatback pad.
Text in Illustration *1 Fastening Tape
| 17. REMOVE FRONT SEPARATE TYPE SEATBACK COVER (w/ Climate Control Seat System) |
Pass the seatback cover bracket through the hole of the front separate type seatback pad.
Text in Illustration *1 Seatback Cover Bracket
|
Remove the hog rings and front separate type seatback cover from the front separate type seatback pad.
 |
| 18. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH (w/ Seat Heater System) |
w/o Climate Control Seat System:
Cut off the tack pins and remove the front seatback heater assembly LH from the front separate type seatback cover.
 |
w/ Climate Control Seat System:
Cut off the tack pins and remove the front seatback heater assembly LH from the front separate type seatback cover.
 |
| 19. REMOVE FRONT SEATBACK PROTECTOR |
 |
Remove the front seatback protector.
Remove any remaining double-sided tape.
Text in Illustration *1 Double-sided Tape
| 20. REMOVE OUTSIDE RECLINING ADJUSTER COVER LH |
 |
Remove the screw.
Detach the claw and remove the outside reclining adjuster cover LH.
| 21. REMOVE OUTSIDE RECLINING ADJUSTER COVER RH |
Remove the screw.
Detach the claw and remove the outside reclining adjuster cover RH.
| 22. REMOVE INSIDE RECLINING ADJUSTER COVER LH |
 |
Detach the wire harness clamp.
Remove the 2 screws.
Detach the claw and remove the inside reclining adjuster cover LH.
| 23. REMOVE INSIDE RECLINING ADJUSTER COVER RH |
Detach the wire harness clamp.
Remove the 2 screws.
Detach the claw and remove the inside reclining adjuster cover RH.
| 24. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (for Driver Side) |
Remove the cable clamp and disconnect the active headrest cable from the seatback spring.
Text in Illustration *1 Cable Clamp *2 Hook
 |
Remove the 4 springs.
Detach the 4 hooks and remove the seatback spring.
Disconnect the connector.
 |
Remove the 2 screws and lumbar support adjuster assembly LH.
| 25. REMOVE BUSH (for Driver Side) |
Detach the 3 claws and remove the bush.
 |
| 26. REMOVE LOWER ACTIVE HEADREST UNIT |
 |
Remove the nut and detach clamp, and then disconnect the active headrest cable from the upper active headrest unit.
Remove the 2 nuts and lower active headrest unit.
 |
| 27. REMOVE UPPER ACTIVE HEADREST UNIT |
 |
Remove the 4 nuts and upper active headrest unit.
| 28. REMOVE FRONT LOWER SEAT CUSHION SHIELD LH |
 |
Remove the screw.
Detach the hook and remove the lower seat cushion shield LH.
| 29. REMOVE FRONT LOWER SEAT CUSHION SHIELD RH |
Remove the screw.
Detach the hook and remove the lower seat cushion shield RH.
| 30. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System) |
 |
Disconnect the connector and detach the wire harness clamp.
Detach the claw and remove the seat heater control sub-assembly.
| 31. REMOVE SEAT CLIMATE CONTROL ECU (w/ Climate Control Seat System) |
 |
Disconnect the connector.
Detach the claw and remove the seat climate control ECU.
| 32. REMOVE SEAT CLIMATE CONTROL CONTROLLER LH (w/ Climate Control Seat System, for Seat Cushion) |
 |
Detach the 4 claws and disconnect the seat climate control blower LH.
Detach the wire harness clamp.
 |
Remove the 2 screws and seat climate control controller LH.
| 33. REMOVE SEAT CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System) |
 |
Disconnect the connector and remove the 2 bolts.
Detach the wire harness clamp.
 |
Remove the nut and seat climate control blower LH.
| 34. REMOVE NO. 1 AIR FILTER (w/ Climate Control Seat System) |
 |
Rotate the No. 1 air filter counterclockwise to detach the claws and remove it.
| 35. REMOVE SEAT FRAME SET BRACKET SUB-ASSEMBLY (w/ Climate Control Seat System) |
 |
Detach the 4 hooks and remove the seat frame set bracket sub-assembly.
| 36. REMOVE SEAT POSITION SENSOR (for Driver Side) |
Using a T30 "TORX" socket wrench, remove the screw and seat position sensor with sensor protector.
 |
Disconnect the connector.
Remove the seat slide position sensor protector from the seat position sensor.
 |
| 37. REMOVE FRONT SEAT AIRBAG ASSEMBLY LH |
Detach the 5 clamps and disconnect the wire harness.
 |
Detach the 2 clamps and disconnect the wire harness.
 |
Remove the 2 nuts and front seat airbag assembly LH.
- CAUTION:
- Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.
| 38. REMOVE FRONT SEAT WIRE LH |
Disconnect the connectors and detach the wire harness clamps.
Detach the claw and remove the front seat wire LH.