Hazard Warning Switch Inspection

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY

Hazard Warning Switch -- Inspection



1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Hazard Warning Switch Inspection

  1. Inspect the hazard warning switch LED illumination.

    1. Apply battery voltage to the connector, and check the LED illumination condition.

      OK:
      Measurement Condition
      		Specified Condition
      Battery positive (+) → Terminal 3 (ILL+)
      Battery negative (-) → Terminal 2 (ILL-)
      		Light illuminates


      2. Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Hazard Warning Switch Inspection

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      4 (F) - 1 (E)
      		Hazard warning signal switch off
      		10 kΩ or higher
      4 (F) - 1 (E)
      		Hazard warning signal switch on
      		Below 1 Ω
      If the result is not as specified, there may be a malfunction in the hazard warning switch.