Hazard Warning Switch Installation

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (w/o Audio)

  2. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL (w/o Audio)

  3. INSTALL CLOCK ASSEMBLY (for Radio and Display Type (Hazard Warning Switch))

  4. INSTALL RADIO RECEIVER ASSEMBLY (for Radio and Display Type)

  5. INSTALL MULTI-DISPLAY ASSEMBLY (w/ Navigation System (Hazard Warning Switch))

  6. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

  7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

  8. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System)

Hazard Warning Switch -- Installation


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (w/o Audio)

  1. Attach the 2 claws to install the hazard warning switch assembly to the center No. 1 instrument cluster finish panel.



2. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL (w/o Audio)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. for Type A:

    1. Connect the connector.

    2. Attach the 8 claws and 3 clips to install the No. 1 center instrument cluster finish panel.



  1. for Type B:



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Connect the connector.

    2. Attach the 10 claws to install the No. 1 center instrument cluster finish panel.



3. INSTALL CLOCK ASSEMBLY (for Radio and Display Type (Hazard Warning Switch))

  1. Install the clock assembly with the 2 screws.



4. INSTALL RADIO RECEIVER ASSEMBLY (for Radio and Display Type)

  1. Connect the connectors.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Insert the radio and display receiver assembly with bracket to attach the 6 claws and 2 clips on its backside.

    NOTICE:
    When inserting the radio and display receiver assembly with bracket, do not press the knobs on it.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Hazard Warning Switch Installation

  1. Install the radio and display receiver assembly with bracket with the 2 screws and 2 bolts.

    Torque:
    Bolt:
    8.5 N*m{87 kgf*cm, 75 in.*lbf}


5. INSTALL MULTI-DISPLAY ASSEMBLY (w/ Navigation System (Hazard Warning Switch))

  1. Connect each connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Insert the multi-display assembly and attach the 8 claws on its backside.

    NOTICE:
    When inserting the multi-display assembly, do not press the knobs on it.

  1. Install the 2 bolts and 2 screws.

    Torque:
    for Bolt:
    8.5 N*m{87 kgf*cm, 75 in.*lbf}


6. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY


  1. for Type A:



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Attach the guide and 7 claws to install the No. 4 instrument panel register assembly.



  1. for Type B:



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Attach the 6 claws to install the No. 4 instrument panel register assembly.



7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


  1. for Type A:



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Attach the guide and 7 claws to install the No. 3 instrument panel register assembly.



  1. for Type B:



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Attach the 6 claws to install the No. 3 instrument panel register assembly.



8. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 8 clips to install the No. 1 speaker opening cover assembly.



9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System)
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).