Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200
Hazard Warning Switch -- Installation |
- HINT:
- Use the same procedures for the RHD and LHD.
- The procedures listed below are the LHD side.
| 1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY |
Attach the 2 claws to install the hazard warning switch.
 |
| 2. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL (w/o Radio Receiver) |
 |
Connect the connector.
Attach the 10 claws to install the No. 1 center instrument cluster finish panel.
| 3. INSTALL RADIO RECEIVER ASSEMBLY (w/ Radio Receiver) |
Connect the connectors.
Install the radio receiver with the 2 screws and 2 bolts.
- Torque:
- Bolt:
- 12 N*m{122 kgf*cm, 9 ft.*lbf}
 |
| 4. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY |
 |
Connect the connector.
Attach the 6 claws to install the No. 4 instrument panel register.
| 5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY |
 |
Connect the connector.
Attach the 6 claws to install the No. 3 instrument panel register.
| 6. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY |
 |
Attach the 8 claws to install the opening cover.
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).