Rear Combination Light Assembly Removal

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

  2. REMOVE REAR COMBINATION LIGHT GASKET LH

  3. REMOVE REAR TURN SIGNAL LIGHT BULB

Rear Combination Light Assembly -- Removal


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Rear Combination Light Assembly Removal

  1. Using a screwdriver wrapped with protective tape, detach the 6 claws and remove the 2 cover.

    Text in Illustration
    *1
    		Protective Tape


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Rear Combination Light Assembly Removal

  1. Put protective tape around the rear combination light assembly LH.

    Text in Illustration
    *1
    		Protective Tape

  1. Remove the 2 bolts.

  1. Detach the 2 clips and remove the rear combination light assembly LH.

  1. Disconnect the connector.



2. REMOVE REAR COMBINATION LIGHT GASKET LH

  1. Remove the rear combination light gasket LH from the rear combination light lens and body LH.



3. REMOVE REAR TURN SIGNAL LIGHT BULB


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the clamp.

  1. Turn the socket in the direction indicated by the arrow in the illustration and remove the socket and rear turn signal light bulb.

  1. Remove the rear turn signal light bulb from the socket.