Rear Combination Light Assembly (For Double Swing Out Type) Installation

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

  2. INSTALL TAIL AND STOP LIGHT BULB

  3. INSTALL REAR TURN SIGNAL LIGHT BULB

  4. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

Rear Combination Light Assembly (For Double Swing Out Type) -- Installation


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

  1. Attach the claw.

  1. Attach the 2 guide to install the rear combination light socket and wire sub-assembly LH.



2. INSTALL TAIL AND STOP LIGHT BULB


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the tail and stop light bulb to the rear combination light socket and wire sub-assembly LH.

  1. Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow in the illustration to install the socket.



3. INSTALL REAR TURN SIGNAL LIGHT BULB


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly LH.

  1. Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow in the illustration to install the socket.



4. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Rear Combination Light Assembly (For Double Swing Out Type) Installation

  1. Connect the connector.

    Text in Illustration
    *1
    		Protective tape

  1. Attach the 3 clips, 2 guides and 2 claws to install the rear combination light assembly LH.

    NOTICE:
    Attach the bolt installation bracket form outside the body while being careful not to bend it.

  1. Install the 2 bolts.