Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200
Headlight Dimmer Switch -- Inspection |
| 1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for LH Side) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 20 (H) - 12 (EL) Light control switch off 10 kΩ or higher 18 (T) - 12 (EL) 18 (T) - 12 (EL) Light control switch tail Below 1 Ω 18 (T) - 12 (EL) Light control switch head Below 1 Ω 20 (H) - 12 (EL)
 |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 17 (HF) - 12 (EL) Headlight dimmer switch flash Below 1 Ω 16 (HL) - 12 (EL) Headlight dimmer switch low beam Below 1 Ω 11 (HU) - 12 (EL) Headlight dimmer switch hi beam Below 1 Ω
- HINT:
- Perform the "LOW BEAM" and "HI BEAM" inspection with the light control switch on "HEAD".
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 14 (CR) - 12 (EL) Turn signal switch right turn Below 1 Ω 13 (TR) - 12 (EL) 13 (TR) - 12 (EL) Turn signal switch right lane change Below 1 Ω 14 (CR) - 12 (EL) Turn signal switch neutral 10 kΩ or higher 13 (TR) - 12 (EL) 15 (TL) - 12 (EL) 15 (TL) - 12 (EL) Turn signal switch left lane change Below 1 Ω 14 (CR) - 12 (EL) Turn signal switch left turn Below 1 Ω 15 (TL) - 12 (EL)
 |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 4 (BFG) - 3 (LFG) Front fog light switch off 10 kΩ or higher 4 (BFG) - 3 (LFG) Front fog light switch on Below 1 Ω
| 2. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for RH Side) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 11 (H) - 19 (EL) Light control switch off 10 kΩ or higher 13 (T) - 19 (EL) 13 (T) - 19 (EL) Light control switch tail Below 1 Ω 13 (T) - 19 (EL) Light control switch head Below 1 Ω 11 (H) - 19 (EL)
 |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 14 (HF) - 19 (EL) Headlight dimmer switch flash Below 1 Ω 15 (HL) - 19 (EL) Headlight dimmer switch low beam Below 1 Ω 20 (HU) - 19 (EL) Headlight dimmer switch hi beam Below 1 Ω
- HINT:
- Perform the "LOW BEAM" and "HI BEAM" inspection with the light control switch on "HEAD".
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 17 (CR) - 19 (EL) Turn signal switch right turn Below 1 Ω 16 (TR) - 19 (EL) 16 (TR) - 19 (EL) Turn signal switch right lane change Below 1 Ω 17 (CR) - 19 (EL) Turn signal switch neutral 10 kΩ or higher 16 (TR) - 19 (EL) 18 (TL) - 19 (EL) 18 (TL) - 19 (EL) Turn signal switch left lane change Below 1 Ω 17 (CR) - 19 (EL) Turn signal switch left turn Below 1 Ω 18 (TL) - 19 (EL)
 |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 7 (BFG) - 8 (LFG) Front fog light switch off 10 kΩ or higher 7 (BFG) - 8 (LFG) Front fog light switch on Below 1 Ω