Roof Headlining (W/O Sliding Roof) Installation

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Interior Panels Trim. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL SIDE TRIM BOX

  2. INSTALL SIDE TRIM BOX COVER

  3. INSTALL QUARTER TRIM LID SUB-ASSEMBLY RH

  4. INSTALL QUARTER TRIM COVER LH (w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type)

  5. INSTALL QUARTER TRIM COVER RH (w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type)

  6. INSTALL REAR NO. 2 SEAT COVER BEZEL (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  7. INSTALL REAR NO. 1 SEAT COVER BEZEL (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  8. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  9. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  10. INSTALL NO. 2 SIDE TRIM BASE COVER LH (w/ Rear Heater)

  11. INSTALL NO. 2 SIDE TRIM BASE COVER RH (w/ Rear Heater)

  12. INSTALL NO. 1 SIDE TRIM BASE COVER LH (w/ Rear Heater)

  13. INSTALL NO. 1 SIDE TRIM BASE COVER RH (w/ Rear Heater)

  14. INSTALL TONNEAU COVER HANGER LH (w/ Tonneau Cover)

  15. INSTALL TONNEAU COVER HANGER RH (w/ Tonneau Cover)

  16. INSTALL TONNEAU COVER HOLDER BRACKET LH (w/ Tonneau Cover)

  17. INSTALL TONNEAU COVER HOLDER BRACKET RH (w/ Tonneau Cover)

  18. INSTALL NO. 2 CUP HOLDER

  19. INSTALL NO. 1 CUP HOLDER

  20. INSTALL QUARTER TRIM COVER SUB-ASSEMBLY LH

  21. INSTALL QUARTER TRIM COVER SUB-ASSEMBLY RH

  22. INSTALL REAR NO. 2 SEAT SHOULDER BELT HANGER LH

  23. INSTALL REAR NO. 2 SEAT SHOULDER BELT HANGER RH

  24. INSTALL REAR SEAT SHOULDER BELT HANGER (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  25. INSTALL ROOF SIDE INNER GARNISH COVER LH (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  26. INSTALL ROOF SIDE INNER GARNISH COVER RH (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  27. INSTALL REAR SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH

  28. INSTALL REAR SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH

  29. INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH

  30. INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH

  31. INSTALL REAR DOOR SCUFF PLATE OUTSIDE LH

  32. INSTALL REAR DOOR SCUFF PLATE OUTSIDE RH

  33. INSTALL FRONT DOOR SCUFF PLATE OUTSIDE LH

  34. INSTALL FRONT DOOR SCUFF PLATE RH

  35. INSTALL BACK DOOR WEATHERSTRIP

  36. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

  37. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

  38. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

  39. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

  40. INSTALL ROOF HEADLINING ASSEMBLY

  41. INSTALL FRONT ROOF SIDE RAIL GARNISH LH

  42. INSTALL FRONT ROOF SIDE RAIL GARNISH RH

  43. INSTALL 3RD SEAT ASSIST GRIP ASSEMBLY (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  44. INSTALL NO. 2 ASSIST GRIP ASSEMBLY LH

  45. INSTALL NO. 2 ASSIST GRIP ASSEMBLY RH

  46. INSTALL ASSIST GRIP ASSEMBLY

  47. INSTALL SEAT BELT ANCHOR COVER (for 3 Person Seat Type Rear No. 2 Seat)

  48. INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)

  49. INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)

  50. INSTALL RAIN SENSOR COVER (w/ Rain Sensor)

  51. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

  52. INSTALL CENTER VISOR ASSEMBLY LH (w/ Sub Visor)

  53. INSTALL CENTER VISOR ASSEMBLY RH (w/ Sub Visor)

  54. INSTALL VISOR HOLDER

  55. INSTALL VISOR ASSEMBLY LH

  56. INSTALL VISOR ASSEMBLY RH

  57. INSTALL VISOR BRACKET COVER

  58. INSTALL NO. 3 ROOM LIGHT ASSEMBLY

  59. INSTALL NO. 1 ROOM LIGHT ASSEMBLY

  60. INSTALL MAP LIGHT ASSEMBLY (w/ Map Light)

  61. INSTALL REAR UPPER PILLAR GARNISH LH

  62. INSTALL REAR UPPER PILLAR GARNISH RH

  63. INSTALL BACK DOOR SERVICE HOLE COVER RH (w/ Power Back Door)

  64. INSTALL BACK DOOR SIDE GARNISH RH (w/ Power Back Door)

  65. INSTALL CENTER BACK DOOR GARNISH (w/ Power Back Door)

  66. INSTALL REAR FRONT QUARTER TRIM GARNISH LH

  67. INSTALL REAR FRONT QUARTER TRIM GARNISH RH

  68. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

  69. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

  70. INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  71. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

  72. INSTALL CENTER PILLAR GARNISH LH

  73. INSTALL CENTER PILLAR GARNISH RH

  74. INSTALL REAR ASSIST GRIP ASSEMBLY

  75. INSTALL CENTER LOWER PILLAR GARNISH LH

  76. INSTALL CENTER LOWER PILLAR GARNISH RH

  77. INSTALL CENTER PILLAR GARNISH COVER LH

  78. INSTALL CENTER PILLAR GARNISH COVER RH

  79. INSTALL FRONT PILLAR GARNISH LH

  80. INSTALL FRONT PILLAR GARNISH RH

  81. INSTALL ASSIST GRIP SUB-ASSEMBLY

  82. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

  83. INSTALL REAR DOOR SCUFF PLATE LH

  84. INSTALL REAR DOOR SCUFF PLATE RH

  85. INSTALL REAR STEP COVER

  86. INSTALL FRONT DOOR SCUFF PLATE LH

  87. INSTALL FRONT DOOR SCUFF PLATE RH

  88. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (except Face to Face Seat Type)

  89. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)

  90. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Face to Face Seat Type)

  91. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)

  92. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  93. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  94. CHECK SRS WARNING LIGHT

Roof Headlining (W/O Sliding Roof) -- Installation


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. A bolt without a torque specification is shown in the standard bolt chart (Click here).


1. INSTALL SIDE TRIM BOX


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the side trim box with the 9 screws.



2. INSTALL SIDE TRIM BOX COVER

  1. Install the side trim box cover.



3. INSTALL QUARTER TRIM LID SUB-ASSEMBLY RH

  1. Install the quarter trim lid sub-assembly RH.



4. INSTALL QUARTER TRIM COVER LH (w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 6 clips to install the quarter trim cover LH.



5. INSTALL QUARTER TRIM COVER RH (w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side.


6. INSTALL REAR NO. 2 SEAT COVER BEZEL (w/ Rear No. 2 Seat, except Face to Face Seat Type)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 6 clips to install the rear No. 2 seat cover bezel.



7. INSTALL REAR NO. 1 SEAT COVER BEZEL (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedures described for the rear No. 2 seat cover bezel.


8. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  1. Attach the 4 claws to install the seat lock control lever.



9. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side.


10. INSTALL NO. 2 SIDE TRIM BASE COVER LH (w/ Rear Heater)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 claws to install the No. 2 side trim base cover LH.



11. INSTALL NO. 2 SIDE TRIM BASE COVER RH (w/ Rear Heater)
HINT:
Use the same procedures described for the LH side.


12. INSTALL NO. 1 SIDE TRIM BASE COVER LH (w/ Rear Heater)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 claws to install the No. 1 side trim base cover LH.



13. INSTALL NO. 1 SIDE TRIM BASE COVER RH (w/ Rear Heater)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 claws to install the No. 1 side trim base cover RH.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the duct with the 6 screws.



14. INSTALL TONNEAU COVER HANGER LH (w/ Tonneau Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. Install the tonneau cover hanger LH and rear quarter trim base with the 2 screws.

    Text in Illustration
    *a
    		Rear Quarter Trim Base


15. INSTALL TONNEAU COVER HANGER RH (w/ Tonneau Cover)
HINT:
Use the same procedures described for the LH side.


16. INSTALL TONNEAU COVER HOLDER BRACKET LH (w/ Tonneau Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. Attach the 3 claws to install the tonneau cover holder bracket LH.

  1. Install the front quarter trim base with the 3 screws and then install the remaining 5 screws.

    Text in Illustration
    *a
    		Front Quarter Trim Base


17. INSTALL TONNEAU COVER HOLDER BRACKET RH (w/ Tonneau Cover)
HINT:
Use the same procedures described for the LH side.


18. INSTALL NO. 2 CUP HOLDER


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 claws to install the No. 2 cup holder.

  1. Install the 5 screws.



19. INSTALL NO. 1 CUP HOLDER


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 claws to install the No. 1 cup holder.

  1. Install the 5 screws.



20. INSTALL QUARTER TRIM COVER SUB-ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 claws to install the quarter trim cover sub-assembly LH.

  1. Install the 7 screws.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear Heater:
    Install the duct with the 8 screws.



21. INSTALL QUARTER TRIM COVER SUB-ASSEMBLY RH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 claws to install the quarter trim cover sub-assembly RH.

  1. Install the 7 screws.



22. INSTALL REAR NO. 2 SEAT SHOULDER BELT HANGER LH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. Install the rear No. 2 seat shoulder belt hanger LH with new 2 spring nuts.

    Text in Illustration
    *a
    		Spring Nut


23. INSTALL REAR NO. 2 SEAT SHOULDER BELT HANGER RH
HINT:
Use the same procedures described for the LH side.


24. INSTALL REAR SEAT SHOULDER BELT HANGER (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedure for both rear No. 1 seat shoulder belt hangers.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. Install the rear No. 1 seat shoulder belt hanger with new 2 spring nuts.

    Text in Illustration
    *a
    		Spring Nut


25. INSTALL ROOF SIDE INNER GARNISH COVER LH (w/ Rear No. 2 Seat, except Face to Face Seat Type)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 7 claws to install the roof side inner garnish cover LH.



26. INSTALL ROOF SIDE INNER GARNISH COVER RH (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side.


27. INSTALL REAR SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 6 claws to install the rear shoulder belt anchor plate sub-assembly LH.



28. INSTALL REAR SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.


29. INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Slide the front shoulder belt anchor plate sub-assembly LH in the direction shown in the illustration and attach the 6 claws to install the front shoulder belt anchor plate sub-assembly LH.



30. INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.


31. INSTALL REAR DOOR SCUFF PLATE OUTSIDE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 clips to install the rear door scuff plate outside LH.



32. INSTALL REAR DOOR SCUFF PLATE OUTSIDE RH
HINT:
Use the same procedures described for the LH side.


33. INSTALL FRONT DOOR SCUFF PLATE OUTSIDE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 clips to install the front door scuff plate outside LH.



34. INSTALL FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


35. INSTALL BACK DOOR WEATHERSTRIP


Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. Install the back door weatherstrip as shown in the illustration.

    Text in Illustration
    *a
    		Alignment Mark
    *b
    		Mark


36. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. Install the rear door opening trim weatherstrip LH as shown in the illustration.

    Text in Illustration
    *a
    		Alignment Mark
    *b
    		Mark


37. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
HINT:
Use the same procedures described for the LH side.


38. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. Install the front door opening trim weatherstrip LH as shown in the illustration.

    Text in Illustration
    *a
    		Alignment Mark
    *b
    		Mark


39. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
HINT:
Use the same procedures described for the LH side.


40. INSTALL ROOF HEADLINING ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
  1. for Manual Seat:
    When installing the roof headlining assembly, move the front seat and rear No. 1 seat to the position shown in the illustration.
  2. for Power Seat:
    When installing the roof headlining assembly, connect the cable to the negative (-) battery terminal and move the front seat and No. 1 rear seat to the position shown in the illustration.
  3. for Power Seat:
    After moving the seats, disconnect the cable from the negative (-) battery terminal.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Place the roof headlining assembly in the cabin from the rear of the vehicle as shown in the illustration.

    NOTICE:
    Be careful not to damage the roof headlining assembly when placing it in the cabin.


  1. for 3 Person Seat Type Rear No. 2 Seat:
    Attach the 2 guides, 12 claws and 2 clips to install the headlining.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation


    Text in Illustration
    *A
    		for 3 Person Seat Type Rear No. 2 Seat
    		-
    		-


  1. except 3 Person Seat Type Rear No. 2 Seat:
    Attach the 2 guides, 12 claws and 3 clips to install the headlining.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation


    Text in Illustration
    *A
    		except 3 Person Seat Type Rear No. 2 Seat
    		-
    		-


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. w/ Rear Wiper:
    Connect the washer hose.

    Text in Illustration
    *a
    		Rear Left Side


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. Connect the antenna cord connector.

    Text in Illustration
    *a
    		Rear Right Side


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. Connect the antenna cord connector and attach the 2 clamps.

  1. Install the bolt.

    Text in Illustration
    *a
    		Front Right Side


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. Connect the 3 roof wire connectors and 4 clamps.

  1. w/ Rear Wiper:
    Connect the washer hose.

    Text in Illustration
    *a
    		Front Left Side
    *b
    		Washer Hose


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Pre-crash Safety System:
    Connect the connectors.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rain Sensor:
    Connect the connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ EC Mirror:
    Connect the connector.



41. INSTALL FRONT ROOF SIDE RAIL GARNISH LH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. Install 3 new clips to the front roof side rail garnish LH.

    Text in Illustration
    *a
    		New Clip

  1. Attach the 3 clips to install the front roof side rail garnish LH.



42. INSTALL FRONT ROOF SIDE RAIL GARNISH RH
HINT:
Use the same procedures described for the LH side.


43. INSTALL 3RD SEAT ASSIST GRIP ASSEMBLY (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedure for both 3rd seat assist grip assemblies.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Assemble the assist grip, 2 clips and 2 covers as shown in the illustration.

  1. Install the 3rd seat assist grip assembly.



44. INSTALL NO. 2 ASSIST GRIP ASSEMBLY LH


  1. w/ Rear No. 2 Seat, except Face to Face Seat Type or w/o Rear No. 2 Seat:
    Install the No. 2 assist grip assembly.



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Assemble the assist grip, 2 clips and 2 covers as shown in the illustration.

    2. Install the No. 2 assist grip assembly LH.



  1. w/ Rear No. 2 Seat, for Face to Face Seat Type:
    Install the No. 2 assist grip assembly.



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Assemble the assist grip, 2 clips and 2 covers as shown in the illustration.

    2. Install the No. 2 assist grip assembly LH.



45. INSTALL NO. 2 ASSIST GRIP ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.


46. INSTALL ASSIST GRIP ASSEMBLY
HINT:
Use the same procedure for both assist grip assemblies.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Assemble the assist grip, 2 clips and 2 covers as shown in the illustration.

  1. Install the assist grip assembly.



47. INSTALL SEAT BELT ANCHOR COVER (for 3 Person Seat Type Rear No. 2 Seat)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 guides and 4 clips to install the seat belt anchor cover.



48. INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 clips and 2 guides to install the No. 1 forward recognition cover as shown in the illustration.



49. INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. Attach the 2 guides and 2 claws to install the No. 2 forward recognition cover as shown in the illustration.



50. INSTALL RAIN SENSOR COVER (w/ Rain Sensor)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the rain sensor cover.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Slide the rain sensor cover to attach the 2 guides.



51. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)


  1. w/ EC Mirror

    1. Attach the claw and temporarily install the inner rear view mirror stay holder cover.



      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Slide the inner rear view mirror stay holder cover in the direction indicated by the arrow shown in the illustration and attach the 2 claws to install the cover.



  1. w/ Automatic High Beam System

    1. Attach the claw and temporarily install the inner rear view mirror stay holder cover.



      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Slide the inner rear view mirror stay holder cover in the direction indicated by the arrow shown in the illustration and attach the 2 claws to install the cover.



52. INSTALL CENTER VISOR ASSEMBLY LH (w/ Sub Visor)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 clips to install the center visor assembly LH.



53. INSTALL CENTER VISOR ASSEMBLY RH (w/ Sub Visor)
HINT:
Use the same procedures described for the LH side.


54. INSTALL VISOR HOLDER
HINT:
Use the same procedure for visor holders.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws.

  1. Push the visor holder in to install it.



55. INSTALL VISOR ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the visor assembly LH with the 2 screws.



56. INSTALL VISOR ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.


57. INSTALL VISOR BRACKET COVER
HINT:
Use the same procedure for visor bracket covers.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 claws to install the visor bracket cover.



58. INSTALL NO. 3 ROOM LIGHT ASSEMBLY


  1. for Bulb Type:



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Attach the 4 claws to install the room light lens to the No. 3 room light assembly.



      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Attach the 4 claws to install the No. 3 room light assembly to the room light switch base.



      3. Land Cruiser. Urj200, 202 Grj200 Vdj200

    3. Attach the 4 claws to install the No. 3 room light assembly.



  1. for LED Type:



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Attach the 4 claws to install the room light lens to the No. 3 room light assembly.

    2. Connect the connector.



      3. Land Cruiser. Urj200, 202 Grj200 Vdj200

    3. Attach the 4 claws to install the No. 3 room light assembly.



59. INSTALL NO. 1 ROOM LIGHT ASSEMBLY

  1. for Bulb Type:
    (Click here)

  1. for LED Type:
    (Click here)



60. INSTALL MAP LIGHT ASSEMBLY (w/ Map Light)


  1. w/ Sliding Roof:

    1. Connect the connectors.

    2. Attach the guides and 2 clips to install the map light assembly.

    3. Install the 2 screws.



    4. Attach the 2 claws to close the 2 covers.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation



  1. w/o Sliding Roof:

    1. Connect the connectors.

    2. Attach the guides and 2 clips to install the map light assembly.

    3. Install the 2 screws.



    4. Attach the 2 claws to close the 2 covers.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation



61. INSTALL REAR UPPER PILLAR GARNISH LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 5 clips to install the rear upper pillar garnish LH.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Install the seat belt shoulder anchor with the bolt.

      Torque:
      42 N*m{428 kgf*cm, 31 ft.*lbf}


      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Attach the 2 claws to close the seat belt shoulder anchor cover.



62. INSTALL REAR UPPER PILLAR GARNISH RH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/o Power Back Door:

    1. Attach the 5 clips to install the rear upper pillar garnish RH.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. w/ Power Back Door:

    1. Pass the power back door rod through the rear upper pillar garnish RH.

      Text in Illustration
      *a
      		Power Back Door Rod

    2. Attach the 5 clips to install the rear upper pillar garnish RH.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the seat belt shoulder anchor with the bolt.

    Torque:
    42 N*m{428 kgf*cm, 31 ft.*lbf}


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to close the seat belt shoulder anchor cover.



63. INSTALL BACK DOOR SERVICE HOLE COVER RH (w/ Power Back Door)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the back door stay plate.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Pass the power back door rod through the hole of the back door service hole cover RH and install the rod with the bolt.

    Torque:
    :
    18 N*m{184 kgf*cm, 13 ft.*lbf}

  1. Move the back door to a half-open position so that the hole in the center of the back door service hole cover RH is aligned lengthwise with the power back door rod.

  1. Attach the 2 clips and install the back door service hole cover RH.

    NOTICE:
    If the back door is in a fully-open position, the power back door rod will interfere with the hole of the back door service hole cover, so do not perform this operation with the back door in a fully open position.


64. INSTALL BACK DOOR SIDE GARNISH RH (w/ Power Back Door)

  1. w/o Power Back Door:

    HINT:
    Use the same procedure described for the LH side.

  1. w/ Power Back Door:

    1. Attach the clip and 4 claws to install the back door side garnish RH.



65. INSTALL CENTER BACK DOOR GARNISH (w/ Power Back Door)

  1. Attach the 5 clips and 4 claws to install the center back door garnish.



66. INSTALL REAR FRONT QUARTER TRIM GARNISH LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Pass the seat belt anchor through the rear front quarter trim garnish LH.

  1. Attach the clip and 2 guides to install the rear front quarter trim garnish LH.

  1. Install the screw.



67. INSTALL REAR FRONT QUARTER TRIM GARNISH RH
HINT:
Use the same procedures described for the LH side.


68. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
When installing the front quarter trim panel assembly LH, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. w/o Rear Air Conditioning System:
      Connect the rear seat lock control lever cable.

    2. w/ Rear Air Conditioning System:
      Connect the thermistor connector and rear seat lock control lever cable.

    3. Attach the 18 clips and 2 claws to install the front quarter trim panel assembly LH.



    4. Install the clip and bolt.

      Torque:
      12 N*m{122 kgf*cm, 9 ft.*lbf}


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation



  1. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:

    1. Attach the 18 clips and 2 claws to install the front quarter trim panel assembly LH.



    2. Install the clip.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation



  1. w/ Tonneau Cover:

    1. Attach the 18 clips and 2 claws to install the front quarter trim panel assembly LH.



    2. Install the screw and clip.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:
    Install the rear No. 2 seat belt anchor with the bolt.

    Torque:
    42 N*m{428 kgf*cm, 31 ft.*lbf}
    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
    Text in Illustration
    *a
    		Protruding Part


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the rear No. 1 seat belt anchor with the bolt.

    Torque:
    42 N*m{428 kgf*cm, 31 ft.*lbf}


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 claws to install the outer lap belt anchor cover.



69. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
When installing the front quarter trim panel assembly RH, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. w/o Rear Air Conditioning System:
      Connect the rear seat lock control lever cable.

    2. w/ Rear Air Conditioning System:
      Connect the thermistor connector and rear seat lock control lever cable.

    3. Attach the 16 clips and 2 claws to install the front quarter trim panel assembly RH.



    4. Install the clip and bolt.

      Torque:
      12 N*m{122 kgf*cm, 9 ft.*lbf}


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation



  1. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:

    1. Attach the 16 clips and 2 claws to install the front quarter trim panel assembly RH.



    2. Install the clip.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation



  1. w/ Tonneau Cover:

    1. Attach the 16 clips and 2 claws to install the front quarter trim panel assembly RH.



    2. Install the screw and clip.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Interior Panels Trim.Instrument Panel Safety Pad.Roof Headlining (W/O Sliding Roof) Installation



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m{428 kgf*cm, 31 ft.*lbf}


      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Attach the 3 claws to install the outer lap belt anchor cover.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the rear No. 1 seat belt anchor with the bolt.

    Torque:
    42 N*m{428 kgf*cm, 31 ft.*lbf}


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 claws to install the outer lap belt anchor cover.



70. INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)
HINT:
Use the same procedure to install the rear seat cover cap on the other side.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 claws to install the rear seat cover cap.



71. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)
HINT:
Use the same procedure for No. 1 tonneau cover holder caps.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the No. 1 tonneau cover holder cap.



72. INSTALL CENTER PILLAR GARNISH LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Pass the seat belt anchor through the center pillar garnish LH.

  1. Attach the 2 clips and 2 guides to install the center pillar garnish LH.

  1. Install the bolt.



73. INSTALL CENTER PILLAR GARNISH RH
HINT:
Use the same procedures described for the LH side.


74. INSTALL REAR ASSIST GRIP ASSEMBLY
HINT:
Use the same procedure for both rear assist grip assemblies.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the rear assist grip assembly.

  1. Install the 2 bolts.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 claws to install the 2 assist grip plugs.



75. INSTALL CENTER LOWER PILLAR GARNISH LH
HINT:
  1. for Manual Seat:
    When installing the center lower pillar garnish LH, move the front seat and seatback to the foremost upright position.
  2. for Power Seat:
    When installing the center lower pillar garnish LH, connect the cable to the negative (-) battery terminal and operate the power seat switch to move the front seat and seatback to the foremost upright position.
  3. for Power Seat:
    After moving the front seat, disconnect the cable from the negative (-) battery terminal.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws and 7 clips to install the center lower pillar garnish LH.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the seat belt anchor with the bolt.

    Torque:
    42 N*m{428 kgf*cm, 31 ft.*lbf}


76. INSTALL CENTER LOWER PILLAR GARNISH RH
HINT:
Use the same procedures described for the LH side.


77. INSTALL CENTER PILLAR GARNISH COVER LH
HINT:
  1. for Manual Seat:
    When installing the center pillar garnish cover LH, move the front seat and seatback to the foremost upright position.
  2. for Power Seat:
    When installing the center pillar garnish cover LH, connect the cable to the negative (-) battery terminal and operate the power seat switch to move the front seat and seatback to the foremost upright position.
  3. for Power Seat:
    After moving the front seat, disconnect the cable from the negative (-) battery terminal.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 clips and 2 guides to install the center pillar garnish cover LH.



78. INSTALL CENTER PILLAR GARNISH COVER RH
HINT:
Use the same procedures described for the LH side.


79. INSTALL FRONT PILLAR GARNISH LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Speaker:
    Connect the speaker connector.

  1. Attach the clip and 3 guides to install the front pillar garnish LH.



80. INSTALL FRONT PILLAR GARNISH RH
HINT:
Use the same procedures described for the LH side.


81. INSTALL ASSIST GRIP SUB-ASSEMBLY
HINT:
Use the same procedure for both assist grip sub-assemblies.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the assist grip sub-assembly.

  1. Install the 2 bolts.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 4 claws to install the 2 assist grip plugs.



82. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 6 clips to install the rear floor mat support plate.



83. INSTALL REAR DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 claws and 4 clips to install the rear door scuff plate LH.

  1. Install the screw.



84. INSTALL REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


85. INSTALL REAR STEP COVER
HINT:
Use the same procedure for both rear step covers.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the rear step cover.



86. INSTALL FRONT DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 7 claws and 4 clips to install the front door scuff plate LH.



87. INSTALL FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


88. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (except Face to Face Seat Type)
(Click here)


89. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side.


90. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Face to Face Seat Type)
(Click here)


91. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side.


92. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  1. Install the tonneau cover assembly.



93. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


94. CHECK SRS WARNING LIGHT
(Click here)