Rear Bumper (W/ Towing Hitch) Disassembly

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Exterior Panels Trim. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE NO. 2 FRAME WIRE (w/ TOYOTA Parking Assist-sensor System)

  2. REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

  3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

  4. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

  5. REMOVE REAR BUMPER ENERGY ABSORBER

  6. REMOVE REFLEX REFLECTOR ASSEMBLY LH

  7. REMOVE REFLEX REFLECTOR ASSEMBLY RH

  8. REMOVE REAR LOWER BUMPER COVER

  9. REMOVE REAR NO. 2 STEP COVER

Rear Bumper (W/ Towing Hitch) -- Disassembly



1. REMOVE NO. 2 FRAME WIRE (w/ TOYOTA Parking Assist-sensor System)

  1. Disconnect the 4 connectors.



  1. Detach the 12 clamps and remove the No. 2 frame wire.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Rear Bumper (W/ Towing Hitch) Disassembly



2. REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the No. 1 ultrasonic sensor.

    HINT:
    1. Use the same procedure for all No. 1 ultrasonic sensors.
    2. The illustration shows the No. 1 ultrasonic sensor for the RH corner and back sensor LH and RH. The installation position of the No. 1 ultrasonic sensor for the LH corner is on the opposite side.


3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the No. 1 ultrasonic sensor retainer from the rear bumper cover.

    HINT:
    1. Use the same procedure to remove the No. 1 ultrasonic sensor retainer on the other side.
    2. The illustration shows the No. 1 ultrasonic sensor retainer for the RH corner. The vertical orientation of the No. 1 ultrasonic sensor retainers for the LH corner is opposite that of the image shown in the illustration.


4. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the No. 2 ultrasonic sensor retainer from the rear bumper cover.

    HINT:
    Use the same procedure to remove the No. 2 ultrasonic sensor retainer on the other side.


5. REMOVE REAR BUMPER ENERGY ABSORBER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 8 claws and remove the rear bumper energy absorber.



6. REMOVE REFLEX REFLECTOR ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 nuts.

  1. Detach the claw and remove the reflex reflector assembly LH.



7. REMOVE REFLEX REFLECTOR ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.


8. REMOVE REAR LOWER BUMPER COVER

  1. Remove the clip and rear lower bumper cover.



9. REMOVE REAR NO. 2 STEP COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 screws and 2 clips.

  1. Detach the 4 claws and remove the rear No. 2 step cover.