Rear Bumper (For Standard) -- Removal |
| 1. REMOVE SPARE WHEEL CARRIER HINGE BRACKET (w/ Tire Carrier) |
 |
Detach the 2 claws and remove the bracket.
| 2. REMOVE SPARE WHEEL COVER SUB-ASSEMBLY (w/ Tire Carrier) |
 |
Remove the 2 nuts.
Detach the clip and remove the cover.
| 3. REMOVE SPARE WHEEL CARRIER SUB-ASSEMBLY (w/ Tire Carrier) |
Remove the spare tire.
Remove the 6 bolts and spare wheel carrier.
| 4. REMOVE REAR QUARTER PANEL MUDGUARD LH |
Remove the 2 clips.
 |
Using a T30 "TORX" socket, remove the 6 screws and rear quarter panel mudguard LH.
| 5. REMOVE REAR QUARTER PANEL MUDGUARD RH |
Remove the 2 clips.
 |
Using a T30 "TORX" socket, remove the 7 screws and rear quarter panel mudguard RH.
| 6. REMOVE REAR BUMPER NO. 1 PLATE (for Step) |
Put protective tape around the rear bumper No. 1 plate.
Detach the 20 claws and remove the rear bumper No. 1 plate.
Text in Illustration *a Protective Tape - -
| 7. REMOVE REAR BUMPER COVER |
- HINT:
- For the rear bumper cover with tire carrier, use the procedures described below.
Put protective tape around the rear bumper cover.
Text in Illustration *a Protective Tape
 |
Open the tail gate and remove the 4 clips.
 |
Close the tail gate.
Remove the 2 bolts, 6 screws and 2 clips.
Text in Illustration *a Bolt
 |
Remove the 5 bolts.
 |
Detach the 7 claws.
- HINT:
- Use the same procedure for the other side.
 |
Remove the rear bumper cover.
 |
w/ TOYOTA Parking Assist-sensor System or w/ Rear Fog Light:
Disconnect the No. 2 frame wire connector.
| 8. REMOVE NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR |
Remove the 2 screws, 2 grommets and No. 2 luggage compartment side cover protector.
 |
| 9. REMOVE NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR |
- HINT:
- Use the same procedure described for the LH side.
| 10. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH |
| 11. REMOVE REAR COMBINATION LIGHT ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
| 12. REMOVE REAR BUMPER UPPER RETAINER LH |
Detach the 2 clips and remove the rear bumper upper retainer LH.
 |
| 13. REMOVE REAR BUMPER UPPER RETAINER RH |
- HINT:
- Use the same procedure described for the LH side.
| 14. REMOVE REAR BUMPER SIDE SUPPORT LH |
Remove the 3 screws.
 |
Detach the 6 claws and remove the rear bumper side support LH.
| 15. REMOVE REAR BUMPER SIDE SUPPORT RH |
- HINT:
- Use the same procedure described for the LH side.
| 16. REMOVE REAR BUMPER NO. 2 REINFORCEMENT |
Remove the 2 bolts and rear bumper No. 2 reinforcement.
 |
| 17. REMOVE REAR BUMPER ARM BRACKET |
Remove the bolt and rear bumper arm bracket.
- HINT:
- Use the same procedure for both rear bumper arm brackets.
 |
| 18. REMOVE REAR BUMPER ARM BRACKET LH |
Disconnect the clamp.
 |
Remove the 2 bolts and rear bumper arm bracket LH.