INSPECT TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ TOYOTA Parking Assist-sensor System)
ADJUST FRONT TELEVISION CAMERA ASSEMBLY (w/ Multi-terrain Monitor)
Front Bumper (W/ Winch) -- Installation |
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
| 1. INSTALL FRONT BUMPER UPPER CENTER RETAINER |
Attach the guide to install the front bumper upper center retainer.
Install the 3 bolts.
| 2. INSTALL HEADLIGHT ASSEMBLY LH |
for Halogen Headlight:
(Click here)
for LED Headlight:
(Click here)
for Halogen Headlight and LED Headlight:
(Click here)
| 3. INSTALL HEADLIGHT ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
| 4. INSTALL FRONT BUMPER SIDE SUPPORT LH |
Attach the 3 claws to install the front bumper side support LH.
Install the 2 screws.
| 5. INSTALL FRONT BUMPER SIDE SUPPORT RH |
- HINT:
- Use the same procedure described for the LH side.
| 6. INSTALL FRONT BUMPER EXTENSION LH |
Install the front bumper extension LH with the 3 bolts.
| 7. INSTALL FRONT BUMPER EXTENSION RH |
- HINT:
- Use the same procedure described for the LH side.
| 8. INSTALL FRONT BUMPER COVER |
w/ Dynamic Radar Cruise Control System:
Connect the connector.
w/ Multi-terrain Monitor:
Connect the connector.
w/ Fog Light:
Connect the No. 4 engine room wire connector.
Connect the winch control wire connector and attach the 6 claws to install the front bumper cover.
Install the 3 clips, 5 screws and 4 bolts.
Using a T30 "TORX" socket, install the 6 screws.
| 9. INSTALL HEADLIGHT COVER LH (w/ Headlight Cover) |
Attach the 5 claws and headlight cover LH.
| 10. INSTALL HEADLIGHT COVER RH (w/ Headlight Cover) |
- HINT:
- Use the same procedure described for the LH side.
| 11. INSTALL UPPER RADIATOR SUPPORT SEAL |
Install the upper radiator support seal with the 7 clips.
| 12. INSTALL FRONT BUMPER WINCH COVER SUB-ASSEMBLY |
Attach the 2 guides to install the front bumper winch cover sub-assembly.
Attach the 2 claws.
| 13. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH |
Push in the clip to install the front fender splash shield sub-assembly LH.
Install the 3 bolts and screw.
| 14. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH |
Push in the clip to install the front fender splash shield sub-assembly RH.
Install the 3 bolts and 2 screws.
| 15. ADJUST HEADLIGHT AIMING |
for Halogen Headlight:
(Click here)
for LED Headlight:
(Click here)
for Halogen Headlight and LED Headlight:
(Click here)
| 16. ADJUST FOG LIGHT AIMING (w/ Fog Light) |
| 17. INSPECT TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ TOYOTA Parking Assist-sensor System) |
| 18. ADJUST FRONT TELEVISION CAMERA ASSEMBLY (w/ Multi-terrain Monitor) |