INSPECT TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ TOYOTA Parking Assist-sensor System)
ADJUST FRONT TELEVISION CAMERA ASSEMBLY (w/ Multi-terrain Monitor)
Front Bumper (For Standard) -- Installation |
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
| 1. INSTALL FRONT BUMPER UPPER CENTER RETAINER |
Attach the guide to install the front bumper upper center retainer.
Install the 3 bolts.
| 2. INSTALL HEADLIGHT ASSEMBLY LH |
for Halogen Headlight:
(Click here)
for LED Headlight:
(Click here)
for Halogen Headlight and LED Headlight:
(Click here)
| 3. INSTALL HEADLIGHT ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
| 4. INSTALL FRONT BUMPER SIDE SUPPORT LH |
Attach the 3 claws to install the front bumper side support LH.
Install the 2 screws.
| 5. INSTALL FRONT BUMPER SIDE SUPPORT RH |
- HINT:
- Use the same procedure described for the LH side.
| 6. INSTALL FRONT BUMPER NO. 2 EXTENSION SUB-ASSEMBLY LH |
Install the front bumper No. 2 extension sub-assembly LH with the 4 nuts.
- Torque:
- 67 N*m{683 kgf*cm, 49 ft.*lbf}
| 7. INSTALL FRONT BUMPER NO. 2 EXTENSION SUB-ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
| 8. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
Install the front bumper reinforcement sub-assembly with the 8 nuts.
- Torque:
- 71 N*m{724 kgf*cm, 52 ft.*lbf}
| 9. INSTALL FRONT BUMPER ENERGY ABSORBER |
Install the front bumper energy absorber.
| 10. INSTALL FRONT BUMPER COVER |
- HINT:
- For the front bumper cover with garnish, use the procedure described below.
w/ Dynamic Radar Cruise Control System:
Connect the connector.
w/ Multi-terrain Monitor:
Connect the connector.
w/ Headlight Cleaner System:
Connect the headlight cleaner hose.
w/ TOYOTA Parking Assist-sensor System or w/ Fog Light:
Connect the No. 4 engine room wire connector.
Attach the 6 claws to install the front bumper cover.
Install the 3 clips, 5 screws and 4 bolts.
Using a T30 "TORX" socket, install the 6 screws.
| 11. INSTALL HEADLIGHT COVER LH (w/ Headlight Cover) |
Attach the 5 claws and headlight cover LH.
| 12. INSTALL HEADLIGHT COVER RH (w/ Headlight Cover) |
- HINT:
- Use the same procedure described for the LH side.
| 13. INSTALL UPPER RADIATOR SUPPORT SEAL |
Install the upper radiator support seal with the 7 clips.
| 14. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH |
Push in the clip to install the front fender splash shield sub-assembly LH.
Install the 3 bolts and screw.
| 15. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH |
Push in the clip to install the front fender splash shield sub-assembly RH.
Install the 3 bolts and 2 screws.
| 16. ADJUST HEADLIGHT AIMING |
for Halogen Headlight:
(Click here)
for LED Headlight:
(Click here)
for Halogen Headlight and LED Headlight:
(Click here)
| 17. ADJUST FOG LIGHT AIMING (w/ Fog Light) |
| 18. ADD WASHER FLUID (w/ Headlight Cleaner System) |
Add washer fluid to the washer jar.
| 19. INSPECT TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ TOYOTA Parking Assist-sensor System) |
| 20. ADJUST FRONT TELEVISION CAMERA ASSEMBLY (w/ Multi-terrain Monitor) |