Toyota Parking Assist-Sensor System Customize Parameters

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

  1. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)

Toyota Parking Assist-Sensor System -- Customize Parameters



CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER
HINT:
The following items can be customized.
NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Customize Setting /

  5. Select the setting by referring to the table below.

    Warning
    Display
    		Default
    		Contents
    		Setting
    Rr Sensor Onset Range
    		Wide
    		Sets the buzzer activation range for the rear sensors.
    		Narrow or Wide
    Keep Sense Buzzer
    		Avail
    		Makes the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds.
    		Not Avail or Avail
    Fr & Rr Buzzer Volume
    		H
    		Changes the buzzer volume setting.
    		L, M1, M2, M3 or H

    Sensor
    Display
    		Default
    		Contents
    		Setting
    Sensor Condition N
    		Avail
    		Makes the sensors available when the shift lever is in N.
    		Not Avail or Avail
    Front Side Dist Sensor
    		Long
    		Sets the buzzer activation range for the front sensors.
    		Short or Long
    Reverse Range Front Sensor
    		Fsde
    		Changes the operation setting for the vehicle front sensors when the shift lever is in R.
    		F, Fs,Fc, Fsde or F Stop
    Non P/R Range Rear Sensor
    		R Stop
    		Changes the operation setting for the vehicle rear sensors when the shift lever is not in P or R.
    		R, Rcrn or R Stop

    Display
    Display
    		Default
    		Contents
    		Setting
    Approach Display OFF
    		Avail
    		The display when moving away from a previously detected obstacle.
    		Not Avail or Avail
    Display Mode
    		All
    		The display mode setting (when the intuitive parking assist system is normal).
    		All or Undisp


CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)
HINT:
The following items can be customized.
NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Turn the engine switch on (IG).

  2. Enter the following menus: Setup / Vehicle / TOYOTA park assist.

  3. Select the setting by referring to the table below.

    Warning
    Display
    		Default
    		Contents
    		Setting
    Alert volume
    		3
    		Sets the buzzer activation range for the rear center sensors.
    		1, 2, 3, 4 or 5
    Display
    		On
    		The display mode setting (when the TOYOTA parking assist-sensor system is normal).
    		On or Off
    Distance
    		Wide
    		Sets the buzzer activation range for the rear center sensors.
    		Narrow or Wide