Dtc C1626 Steering Angle Sensor Failure

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

REPLACE SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY

CHECK FOR DTC

DTC C1626 Steering Angle Sensor Failure


DESCRIPTION

This DTC is stored if the parking assist ECU receives a signal via CAN communication from the steering sensor that indicates an internal malfunction.

DTC Code
DTC Detection Condition
Trouble Area
C1626
A fail flag is transmitted from the steering angle sensor.
  1. Spiral with sensor cable sub-assembly
  2. Parking assist ECU

INSPECTION PROCEDURE

NOTICE:
  1. When "!" mark is displayed on the multi-display after the battery terminal disconnected, correct the steering angle neutral point (Click here).
  2. Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the multi-terrain monitor system may be needed (Click here).
1.REPLACE SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY

  1. Replace the spiral with sensor cable sub-assembly (Click here).


NEXT


2.CHECK FOR DTC

  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC C1626 is not output.


NG
REPLACE PARKING ASSIST ECU (Click here)
OK

END (SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY IS DEFECTIVE)