Toyota Parking Assist-Sensor System How To Proceed With Troubleshooting

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. VEHICLE BROUGHT TO WORKSHOP

  2. CUSTOMER PROBLEM ANALYSIS

  3. INSPECT BATTERY VOLTAGE

  4. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

  5. CHECK DTC

  6. PROBLEM SYMPTOMS TABLE

  7. OVERALL ANALYSIS AND TROUBLESHOOTING*

  8. ADJUST, REPAIR OR REPLACE

  9. CONFIRMATION TEST

Toyota Parking Assist-Sensor System -- How To Proceed With Troubleshooting


HINT:
  1. Use the following procedures to troubleshoot the TOYOTA parking assist-sensor system.
  2. *: Use the GTS.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

      NEXT


      3.INSPECT BATTERY VOLTAGE
        Standard voltage:
        11 to 14 V
        If the voltage is below 11 V, replace or recharge the battery before proceeding.

      NEXT


      4.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

      1. Use the GTS to check if the CAN communication system is functioning normally.

        Result
        Result
        		Proceed to
        CAN DTC is not output.
        		A
        CAN DTC is output (for LHD).
        		B
        CAN DTC is output (for RHD).
        		C



      		B.
      Go to CAN COMMUNICATION SYSTEM (Click here)

      		C.
      Go to CAN COMMUNICATION SYSTEM (Click here)
      A


      5.CHECK DTC

      1. Check for DTCs (Click here).

      2. Clear the DTCs (Click here).

      3. Recheck for DTCs (Click here).

        Result
        Result
        		Proceed to
        DTCs are not output (Problem symptom occurs).
        		A
        DTCs are not output (Problem symptom does not occur).
        		B
        DTCs are output.
        		C



      		B.
      Go to USE SIMULATION METHOD TO CHECK (Click here)

      		C.
      Go to DIAGNOSTIC TROUBLE CODE CHART (Click here)
      A


      6.PROBLEM SYMPTOMS TABLE

      1. Refer to the Problem Symptoms Table (Click here).

        Result
        Result
        		Proceed to
        Fault is not listed in problem symptoms table.
        		A
        Fault is listed in problem symptoms table.
        		B



      		B.
      ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE
      A


      7.OVERALL ANALYSIS AND TROUBLESHOOTING*

      1. Operation Check (Click here).

      2. Terminals of ECU (Click here).

      3. Data List / Active Test (Click here).


      NEXT


      8.ADJUST, REPAIR OR REPLACE

        NEXT


        9.CONFIRMATION TEST

          NEXT

          END