Ecm Removal

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Vd-Ftv Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. DISCONNECT CONNECTOR HOLDER BLOCK

  4. REMOVE ECM

  5. REMOVE GASKET

Ecm -- Removal



1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected (Click here).


3. DISCONNECT CONNECTOR HOLDER BLOCK


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Engine Control.Ecd System (W/ Dpf).Ecm Removal

  1. Remove the 3 bolts and move the connector holder block so that the ECM can be removed in the next step.



4. REMOVE ECM


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Engine Control.Ecd System (W/ Dpf).Ecm Removal

  1. Raise the 2 levers while pushing the locks on the 2 levers.

    NOTICE:
    Make sure that the lock levers are raised 90° as shown in the illustration before disconnecting the ECM connectors. Failure to do this may cause the ECM connectors to break.

  1. Disconnect the 2 connectors.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 4 bolts and ECM.



5. REMOVE GASKET


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Peel off the gasket.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Engine Control.Ecd System (W/ Dpf).Ecm Removal

  1. Spray gasket remover or equivalent on the remaining tape of the gasket.

    NOTICE:
    When using gasket remover or equivalent, cover the ECM connector with a cloth.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the tape of the gasket without using bladed objects.