Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Ur-Fe Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200
Camshaft Position Sensor -- Removal |
| 1. REMOVE V-BANK COVER SUB-ASSEMBLY |
Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.
Text in Illustration *1 Grommet *2 Pin *3 Hook *4 Bracket
 |
| 2. REMOVE AIR CLEANER CAP AND HOSE |
Disconnect the No. 2 PCV hose and No. 1 air hose.
 |
Disconnect the mass air flow meter connector and detach the clamp.
Detach the 4 clamps.
Loosen the hose clamp and remove the air cleaner cap and hose.
| 3. REMOVE CAMSHAFT POSITION SENSOR |
Disconnect the camshaft position sensor connector.
 |
Remove the bolt and camshaft position sensor.
| 4. REMOVE VVT SENSOR |
Disconnect the 4 VVT sensor connectors.
Text in Illustration *A for Bank 2 *B for Bank 1
 |
Remove the 4 bolts and 4 VVT sensors.