Camshaft Position Sensor Installation

Apply a light coat of engine oil to the O-ring of the VVT sensor.

NOTICE:

1. When reusing the sensor, inspect the O-ring.
   
2. If the O-ring has scratches or cuts, replace the sensor.
   

Install the 4 sensors with the 4 bolts.

Torque:

10 N*m{102 kgf*cm, 7 ft.*lbf}

Connect the 4 sensor connectors.

Install the sensor with the bolt.

Torque:

10 N*m{102 kgf*cm, 7 ft.*lbf}

NOTICE:

1. When reusing the sensor, inspect the O-ring.
   
2. If the O-ring has scratches or cuts, replace the sensor.
   

Connect the sensor connector.

Install the air cleaner hose so that the protrusion of the air cleaner cap aligns with the groove of the hose as shown in the illustration.

Tighten the 2 clamps.

Torque:

2.5 N*m{25 kgf*cm, 22 in.*lbf}

Connect the vacuum hose.

Connect the No. 2 ventilation hose.

Attach the 2 V-bank cover hooks to the bracket. Then align the 3 V-bank cover grommets with the 3 pins, and press down on the V-bank cover to attach the pins.