Power Steering Oil Pressure Switch On-Vehicle Inspection

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Ur-Fe Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT POWER STEERING OIL PRESSURE SWITCH

Power Steering Oil Pressure Switch -- On-Vehicle Inspection



1. INSPECT POWER STEERING OIL PRESSURE SWITCH

  1. Connect the GTS to the DLC3.

  1. Turn the engine switch on (IG).

  1. Turn the GTS on.

  1. Enter the following menus: Powertrain / Engine and ECT / Data List / All Data / Power Steering Pressure.

  1. Start the engine.

  1. Operate the steering wheel while idling and read the value on the GTS.

    Standard:

    Measurement Condition
    		Specified Condition
    Power steering not operating
    		0 to 2000 kPa (0 to 20 kgf/cm2, 0 to 290 psi)
    Power steering operating
    		Value changes from value displayed when power steering not operating
    If the result is not as specified, check for DTCs (Click here). If the power steering system inspection results are normal and a DTC is not output, replace the power steering oil pressure switch.