4Wd Control Switch (W/O Entry And Start System) Removal

Drivetrain. Land Cruiser. Urj200, 202 Grj200 Vdj200

Jf2A Transfer 4Wd Awd. Land Cruiser. Urj200, 202 Grj200 Vdj200

REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
REMOVE TRANSFER POSITION SWITCH

4Wd Control Switch (W/O Entry And Start System) -- Removal

HINT:

Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.

1. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

for Type A:
1. Put protective tape around the No. 2 instrument panel finish panel cushion.
  Text in Illustration
  *a
  Protective Tape
2. Using a moulding remover B, detach the 4 claws and 3 clips and remove the No. 2 instrument panel finish panel cushion.

for Type B:
1. Put protective tape around the No. 2 instrument panel finish panel cushion.
  Text in Illustration
  *a
  Protective Tape
2. Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.

2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

for Type A:
1. Put protective tape around the lower instrument panel pad sub-assembly LH.
  Text in Illustration
  *a
  Protective Tape
2. Remove the clip and screw.
3. Detach the 11 claws and guide.
4. Disconnect the connector and detach the clamps and remove the lower instrument panel pad sub-assembly LH.

for Type B:
1. Put protective tape around the lower instrument panel pad sub-assembly LH.
  Text in Illustration
  *a
  Protective Tape
2. Remove the clip and screw.
3. Detach the 8 claws and 2 guides and remove the lower instrument panel pad sub-assembly LH.

3. REMOVE TRANSFER POSITION SWITCH

Land Cruiser. Urj200, 202 Grj200 Vdj200

Detach the 3 claws and remove the transfer position switch.