Lighting System Headlight Dimmer Switch Circuit
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
INSPECT HEADLIGHT DIMMER SWITCH (TURN SIGNAL SWITCH)
CHECK HARNESS AND CONNECTOR (HEADLIGHT DIMMER SWITCH - TURN SIGNAL FLASHER AND BODY GROUND)
LIGHTING SYSTEM - Headlight Dimmer Switch Circuit |
DESCRIPTION
The turn signal flasher receives a turn signal light information signal from the headlight dimmer switch.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.INSPECT HEADLIGHT DIMMER SWITCH (TURN SIGNAL SWITCH) |
Remove the headlight dimmer switch (Click here).
for LH Side:
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
13 (TR) - 12 (EL)
| Turn signal switch right turn
| Below 1 Ω
|
Turn signal switch off
| 10 kΩ or higher
|
15 (TL) - 12 (EL)
| Turn signal switch left turn
| Below 1 Ω
|
Turn signal switch off
| 10 kΩ or higher
|
for RH Side:
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
16 (TR) - 19 (EL)
| Turn signal switch right turn
| Below 1 Ω
|
Turn signal switch off
| 10 kΩ or higher
|
18 (TL) - 19 (EL)
| Turn signal switch left turn
| Below 1 Ω
|
Turn signal switch off
| 10 kΩ or higher
|
| 2.CHECK HARNESS AND CONNECTOR (HEADLIGHT DIMMER SWITCH - TURN SIGNAL FLASHER AND BODY GROUND) |
Disconnect the E14 switch connector.
Disconnect the E19 relay connector.
for LH Side:
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
E14-13 (TR) - E19-6 (ER)
| Always
| Below 1 Ω
|
E14-15 (TL) - E19-5 (EL)
|
E14-12 (EL) - Body ground
|
E14-13 (TR) - Body ground
| Always
| 10 kΩ or higher
|
E14-15 (TL) - Body ground
|
for RH Side:
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
E14-16 (TR) - E19-6 (ER)
| Always
| Below 1 Ω
|
E14-18 (TL) - E19-5 (EL)
|
E14-19 (EL) - Body ground
|
E14-16 (TR) - Body ground
| Always
| 10 kΩ or higher
|
E14-18 (TL) - Body ground
|
ResultResult
| Proceed to
|
OK (for LHD)
| A
|
OK (for RHD)
| B
|
NG
| C
|
| |
|
| | REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
