Meter / Gauge System Speedometer Malfunction

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Meter Gauge Display. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK CAN COMMUNICATION SYSTEM

CHECK ANTI-LOCK BRAKE SYSTEM (VEHICLE SPEED)

PERFORM ACTIVE TEST USING INTELLIGENT TESTER (SPEEDOMETER)

READ VALUE USING INTELLIGENT TESTER (VEHICLE SPEED)

READ VALUE USING INTELLIGENT TESTER (WHEEL SPEED SENSOR)

METER / GAUGE SYSTEM - Speedometer Malfunction


DESCRIPTION

The combination meter receives vehicle speed signals from the skid control ECU via the CAN line. The vehicle speed sensor detects the voltage that varies according to the vehicle speed. The skid control ECU supplies power to the vehicle speed sensor. The skid control ECU detects vehicle speed signals based on the pulses of the voltage.

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Meter Gauge Display.Meter / Gauge System.Meter / Gauge System Speedometer Malfunction


INSPECTION PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM

  1. Check for DTCs (Click here).

    Result
    Result
    		Proceed to
    CAN communication DTC is not output
    		A
    CAN communication system (for LHD) DTC is output
    		B
    CAN communication system (for RHD) DTC is output
    		C


B
Go to CAN COMMUNICATION SYSTEM (Click here)

C
Go to CAN COMMUNICATION SYSTEM (Click here)
A


2.CHECK ANTI-LOCK BRAKE SYSTEM (VEHICLE SPEED)

  1. Check for DTCs (Click here).



NG
Go to DIAGNOSTIC TROUBLE CODE CHART (Click here)
OK


3.PERFORM ACTIVE TEST USING INTELLIGENT TESTER (SPEEDOMETER)

  1. Operate the intelligent tester according to the display and select Active Test (Click here).

    Combination Meter
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Speed Meter Operation
    		Speedometer
    		0, 40, 80, 120, 160, 200, 240 or 280
    		Perform the test with the vehicle stopped and engine idling.
    HINT:
    1. Make sure that the vehicle is stopped and the engine is idling. The doors will be locked automatically when performing the speedometer Active Test. This is a normal function.
    2. The displayed value has the same units (km/h, mph) as the main scale of the vehicle speedometer.
    3. The needle position should be within the acceptable tolerance.
      OK:
      Needle indication is normal.
Result
Result
Proceed to
OK
A
NG (w/ Multi-information Display)
B
NG (w/o Multi-information Display)
C


B
REPLACE COMBINATION METER ASSEMBLY (Click here)

C
REPLACE COMBINATION METER ASSEMBLY (Click here)
A


4.READ VALUE USING INTELLIGENT TESTER (VEHICLE SPEED)

  1. Operate the intelligent tester according to the display and select Data List (Click here).

    Combination Meter
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Vehicle Speed meter
    		Vehicle speed/Min.: 0 (0), Max.: 255 (158)
    		Almost same as actual speed (when driving)
    		Unit: km/h (mph)
    OK:
    Vehicle speed displayed on the intelligent tester is almost the same as actual vehicle speed measured using speedometer tester (calibrated chassis dynamometer).
    Result
    Result
    		Proceed to
    NG
    		A
    OK (w/ Multi-information Display)
    		B
    OK (w/o Multi-information Display)
    		C


B
REPLACE COMBINATION METER ASSEMBLY (Click here)

C
REPLACE COMBINATION METER ASSEMBLY (Click here)
A


5.READ VALUE USING INTELLIGENT TESTER (WHEEL SPEED SENSOR)

  1. Operate the intelligent tester according to the display and select Data List (Click here).

    ABS/VSC/TRAC
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    FR Wheel Speed
    		Wheel speed sensor FR reading/Min.: 0 (0), Max.: 326 (202)
    		Actual wheel speed
    		A similar speed is indicated on the speedometer.
    FL Wheel Speed
    		Wheel speed sensor FL reading/Min.: 0 (0), Max.: 326 (202)
    		Actual wheel speed
    		A similar speed is indicated on the speedometer.
    RR Wheel Speed
    		Wheel speed sensor RR reading/Min.: 0 (0), Max.: 326 (202)
    		Actual wheel speed
    		A similar speed is indicated on the speedometer.
    RL Wheel Speed
    		Wheel speed sensor RL reading/Min.: 0 (0), Max.: 326 (202)
    		Actual wheel speed
    		A similar speed is indicated on the speedometer.
    OK:
    Vehicle speed displayed on the intelligent tester is almost the same as actual vehicle speed measured using speedometer tester (calibrated chassis dynamometer).
    Result
    Result
    		Proceed to
    NG (for LHD)
    		A
    NG (for RHD)
    		B
    OK (w/ Multi-information Display)
    		C
    OK (w/o Multi-information Display)
    		D


B
REPLACE HYDRAULIC BRAKE BOOSTER ASSEMBLY (Click here)

C
REPLACE COMBINATION METER ASSEMBLY (Click here)

D
REPLACE COMBINATION METER ASSEMBLY (Click here)
A

REPLACE HYDRAULIC BRAKE BOOSTER ASSEMBLY (Click here)