Meter / Gauge System Operation Check

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Meter Gauge Display. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT INDICATOR/WARNING LIGHT

  1. INSPECT SPEEDOMETER

  1. INSPECT TACHOMETER

  1. INSPECT METER/GAUGE

  1. INSPECT WARNING/INDICATOR LIGHT

  1. INSPECT ENGINE OIL LEVEL WARNING (except 3UR-FE)

  1. INSPECT MULTI-INFORMATION DISPLAY (w/ Multi-information Display)

Meter / Gauge System -- Operation Check



INSPECT INDICATOR/WARNING LIGHT

  1. Check the following indicators and warning lights.

    Indicator/Warning Light
    		Switch Condition
    		Specified Condition
    Headlight warning light*1
    		Ignition switch off → ON
    		Comes on for 3 seconds
    A/T OIL TEMP warning light*1*2
    Fuel sedimenter warning indicator light*3
    DPF indicator light*3
    BRAKE warning light
    ABS warning light
    SLIP indicator light*4
    CRAWL indicator light*5
    TRC OFF indicator light*4
    PCS indicator light*5
    Eco driving indicator light*6
    Multi-terrain select indicator light*7
    Turn assist indicator light*4
    Head light level warning light*8
    AHB indicator light*9
    PPS warning light
    VSC OFF indicator light*4
    BSM indicator light*1*10
    Tire pressure warning light*1*11
    RSCA OFF indicator light
    Washer level warning light*1
    Oil level warning light*1
    Speed limit indicator light*1*12
    SRS warning light
    		Ignition switch off → ON
    		Comes on for 6 seconds
    CHARGE warning light
    		Ignition switch off → ON
    		Illuminates when ignition switch is turned to ON. Turns off when engine is started.
    MIL

    1. *1: w/o Multi-information Display
    2. *2: for Automatic Transmission
    3. *3: for 1VD-FTV
    4. *4: w/ VSC
    5. *5: w/ CRAWL Control System
    6. *5: w/ Pre-crash Safety System
    7. *6: for Automatic Transmission
    8. *7: w/ Multi-terrain Select
    9. *8: w/ Head Light Leveling System
    10. *9: w/ Adaptive Head Light System
    11. *10: w/ Blind Spot Monitor System
    12. *11: w/ Tire Pressure Monitoring System
    13. *12: for Middle EAST

INSPECT SPEEDOMETER

  1. Connect the GTS to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the GTS on.

  4. Enter the following menus: Powertrain / Engine and ECT / Data List.

    Reference:

    km/h (for Australia):
    Standard Indication
    		Acceptable Range
    20 km/h
    		20.8 to 25 km/h
    40 km/h
    		41 to 45.5 km/h
    60 km/h
    		61.2 to 65.7 km/h
    80 km/h
    		81.4 to 85.8 km/h
    100 km/h
    		101.8 to 106.1 km/h
    120 km/h
    		122.1 to 126.8 km/h
    140 km/h
    		142.5 to 147.5 km/h
    160 km/h
    		163 to 168.2 km/h
    180 km/h
    		183.4 to 188.8 km/h
    200 km/h
    		203.9 to 209.5 km/h
    220 km/h
    		224.4 to 250.9 km/h
    240 km/h
    		244.8 to 250.8 km/h

    km/h (except Australia):
    Standard Indication
    		Acceptable Range
    20 km/h
    		21 to 25 km/h
    40 km/h
    		41.7 to 46.2 km/h
    60 km/h
    		62.7 to 67.2 km/h
    80 km/h
    		83.4 to 88.4 km/h
    100 km/h
    		104.3 to 109.3 km/h
    120 km/h
    		125.1 to 130.6 km/h
    140 km/h
    		145.8 to 151.8 km/h
    160 km/h
    		166.2 to 173.2 km/h
    180 km/h
    		186.9 to 194.5 km/h
    200 km/h
    		207.7 to 215.7 km/h
    220 km/h
    		228.4 to 236.8 km/h
    240 km/h
    		249.2 to 258 km/h

    mph:
    Standard Indication
    		Acceptable Range
    20 mph
    		21 to 23.5 mph
    40 mph
    		42 to 44.5 mph
    60 mph
    		62.5 to 66 mph
    80 mph
    		83.1 to 87.1 mph
    100 mph
    		103.8 to 108.4 mph
    120 mph
    		124.7 to 129.6 mph
    140 mph
    		145.4 to 150.7 mph
    If the result is not as specified, the speedometer may have a malfunction.
    NOTICE:
    Do not use worn, underinflated or overinflated tires, as the speedometer reading will be inaccurate.

  5. Check the deflection width of the speedometer indicator.

    Reference:
    Within 0.3°

INSPECT TACHOMETER

  1. Connect a tune-up tachometer, and start the engine.

  2. Compare the test results with the tachometer indicator.

    DC 13.5 V, at 25°C (77°F):
    Standard indication
    		Acceptable range
    Data in ( ) is for reference
    700 rpm
    		630 to 770 rpm
    1000 rpm
    		(900 to 1100 rpm)
    2000 rpm
    		(1850 to 2150 rpm)
    3000 rpm
    		2800 to 3200 rpm
    4000 rpm
    		(3800 to 4200 rpm)
    5000 rpm
    		4800 to 5200 rpm
    6000 rpm
    		(5750 to 6250 rpm)
    If the result is not as specified, the tachometer may have a malfunction.


INSPECT METER/GAUGE

  1. Connect the GTS to the DLC3.

  2. Perform Active Test (Click here).

    OK:
    Each meter/gauge needle indication is normal.

INSPECT WARNING/INDICATOR LIGHT

  1. Connect the GTS to the DLC3.

  2. Perform Active Test (Click here).

    OK:
    Each warning/indicator light turns on and off using the GTS.

INSPECT ENGINE OIL LEVEL WARNING (except 3UR-FE)

  1. Turn the ignition switch to ON and warm up the engine at an engine speed of 2000 rpm or less until the coolant temperature reaches approximately 80°C (176°F) or more.

  2. Disconnect the engine oil level sensor connector for 40 seconds or more.

  3. Turn the ignition switch to ON and check the multi-information display.

    OK:
    Low engine oil level message is displayed.

INSPECT MULTI-INFORMATION DISPLAY (w/ Multi-information Display)

  1. Connect the GTS to the DLC3.

  2. Perform Active Test (Click here).

    HINT:
    If this Active Test is being performed and the ignition switch is turned off and then ON, the A/T and ODO/TRIP display background may turn white. If this occurs, end Active Test and turn the ignition switch off.
    OK:
    All dots in the multi-information display turn on and off using the GTS.