Dtc P060E Internal Control Module Throttle Position Performance

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
3Ur-Fe Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

CHECK DTC

DTC P060E Internal Control Module Throttle Position Performance


DESCRIPTION

The ECM monitors the input signals of the Throttle Position (TP) sensor No. 1 and stop light switch. As the ECM monitors the input signals of the TP sensor No. 1 and the STP signals of the stop light switch, if the input signals and control signals are deviated, a DTC is stored.

DTC Code
DTC Detection Condition
Trouble Area
P060E
When either condition below is met:
  1. An ECM main CPU error.
  2. An ECM sub CPU error.
ECM

INSPECTION PROCEDURE

1.CHECK DTC

  1. Clear DTC (Click here).

  1. Turn the engine switch off.

  1. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.

  1. Connect the cable to the negative (-) battery terminal.

  1. Turn the engine switch on (IG).

  1. Check DTC.

    OK:
    P060E is not output.


NG
REPLACE ECM (Click here)
OK

CHECK FOR INTERMITTENT PROBLEMS (Click here)