Drivetrain. Land Cruiser. Urj200, 202 Grj200 Vdj200
Ab60F Automatic Transmission Transaxle. Land Cruiser. Urj200, 202 Grj200 Vdj200
Shift Lever (W/ Entry And Start System) -- Installation |
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY |
 |
Install the transmission floor shift assembly with the 4 bolts. Tighten the bolts in the order shown in the illustration.
- Torque:
- 14 N*m{143 kgf*cm, 10 ft.*lbf}
Text in Illustration 
Bolt 
Connector
Connect the 3 connectors.
| 2. CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY |
 |
Turn the transmission control shaft lever of the park/neutral position switch counterclockwise until it stops, and then turn it clockwise 2 notches to set it to the N position.
Move the shift lever to N.
Temporarily install the floor shift gear shifting rod sub-assembly to the transmission floor shift assembly with the nut.
 |
Tighten the nut while lightly pushing the lever rearward.
- Torque:
- 13 N*m{130 kgf*cm, 9 ft.*lbf}
Text in Illustration *a Lever Nut Push
| 3. INSTALL FRONT CONSOLE BOX (w/o Cool Box) |
| 4. INSTALL FRONT CONSOLE BOX (w/ Cool Box) |