Dtc P0575 Cruise Control Input Circuit

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
Cruise Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

CHECK DTC OUTPUT (CRUISE CONTROL SYSTEM)

DTC P0575 Cruise Control Input Circuit


DESCRIPTION

This DTC indicates a malfunction in the ECM.

DTC Code
DTC Detection Condition
Trouble Area
P0575
ECM has a supervisory CPU and control ECU inside. When each input STP signal is different this DTC is output. This DTC is also output after 0.4 seconds have passed from the time a cruise cancel input signal (STP input) is input to the ECM.
ECM
HINT:
The ECM receives signals from each sensor to control all functions of the cruise control system. When a trouble code is detected, the fail-safe function remains on until the ignition switch is turned off.

INSPECTION PROCEDURE

1.CHECK DTC OUTPUT (CRUISE CONTROL SYSTEM)

  1. Clear the DTCs (Click here).

  1. Perform the following to make sure that the DTC detection conditions are met.

    HINT:
    If the detection conditions are not met, the malfunction cannot be detected.

    1. Drive the vehicle at a speed for which cruise control operation is possible.

    2. Turn the cruise control system on using the cruise control main switch (ON/OFF).

    3. Push the cruise control main switch to -/SET to begin control of vehicle speed by the cruise control system.

  1. Check the DTCs (Click here).

    Result:
    Result
    		Proceed to
    DTC is not output
    		A
    DTC P0575 is output (for 1GR-FE)
    		B
    DTC P0575 is output (for 1VD-FTV)
    		C
    DTC P0575 is output (for 1UR-FE)
    		D
    DTC P0575 is output (for 3UR-FE)
    		E


B
REPLACE ECM (Click here)

C
REPLACE ECM (Click here)

D
REPLACE ECM (Click here)

E
REPLACE ECM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)