Valve Body Assembly Inspection

Drivetrain. Land Cruiser. Urj200, 202 Grj200 Vdj200
Ae80F Automatic Transmission Transaxle. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT SHIFT SOLENOID VALVE SL1

  2. INSPECT SHIFT SOLENOID VALVE SL2

  3. INSPECT SHIFT SOLENOID VALVE SL3

  4. INSPECT SHIFT SOLENOID VALVE SL4

  5. INSPECT SHIFT SOLENOID VALVE SL5

  6. INSPECT SHIFT SOLENOID VALVE SLU

  7. INSPECT SHIFT SOLENOID VALVE SLT

  8. INSPECT SHIFT SOLENOID VALVE SC1

  9. INSPECT SHIFT SOLENOID VALVE SC2

Valve Body Assembly -- Inspection



1. INSPECT SHIFT SOLENOID VALVE SL1


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Ae80F Automatic Transmission Transaxle.Automatic Transmission System.Valve Body Assembly Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		5.0 to 5.6 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Shift Solenoid Valve SL1)

  1. Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the shift solenoid valve SL1 connector, then check the movement of the valve.

    OK:
    The solenoid makes an operating sound.
    If the result is not as specified, replace the shift solenoid valve SL1.


2. INSPECT SHIFT SOLENOID VALVE SL2
HINT:
Refer to the procedures for the shift solenoid valve SL1.


3. INSPECT SHIFT SOLENOID VALVE SL3
HINT:
Refer to the procedures for the shift solenoid valve SL1.


4. INSPECT SHIFT SOLENOID VALVE SL4
HINT:
Refer to the procedures for the shift solenoid valve SL1.


5. INSPECT SHIFT SOLENOID VALVE SL5
HINT:
Refer to the procedures for the shift solenoid valve SL1.


6. INSPECT SHIFT SOLENOID VALVE SLU
HINT:
Refer to the procedures for the shift solenoid valve SL1.


7. INSPECT SHIFT SOLENOID VALVE SLT
HINT:
Refer to the procedures for the shift solenoid valve SL1.


8. INSPECT SHIFT SOLENOID VALVE SC1


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Ae80F Automatic Transmission Transaxle.Automatic Transmission System.Valve Body Assembly Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    Shift solenoid valve SC1 connector terminal - Shift solenoid valve SC1 body
    		15 to 25°C (59 to 77°F)
    		11 to 15 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Shift Solenoid Valve SC1)

  1. Connect the positive (+) lead to the terminal of the shift solenoid valve SC1 connector, and the negative (-) lead to the shift solenoid valve SC1 body.

    OK:
    The solenoid makes an operating sound.
    If the result is not as specified, replace the shift solenoid valve SC1.


9. INSPECT SHIFT SOLENOID VALVE SC2
HINT:
Refer to the procedures for the shift solenoid valve SC1.