Dtc B1458/58 Passenger Side Air Outlet Damper Control Servo Motor Circuit

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Heating Air Conditioning. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

READ VALUE USING GTS (AIR MIX DAMPER SERVO TARG PLS[P&R P], A/M SERVO ACTUAL PULSE[P&R P])

CHECK AIR MIX DAMPER SERVO MOTOR (REAR FRONT PASSENGER SIDE)

CHECK AIR CONDITIONING HARNESS ASSEMBLY

CHECK FOR DTC

DTC B1458/58 Passenger Side Air Outlet Damper Control Servo Motor Circuit


DESCRIPTION

  1. *1: for LHD
  2. *2: for RHD
The air mix damper servo motor (rear RH*1 or LH*2) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the air mix damper servo motor (rear RH*1 or LH*2) to any position. As a result, the amount of air that has passed through the evaporator and is passing through the heater core is adjusted, and the temperature of the air blowing toward the rear passenger side is controlled.
HINT:
Confirm that no mechanical problem is present because this trouble code can be output when either a damper link or damper is mechanically locked.

DTC Code
DTC Detection Condition
Trouble Area
B1458/58
The air mix damper position does not change even if the air conditioning amplifier assembly operates the air mix damper servo motor (rear RH*1 or LH*2).
  1. Air mix damper servo motor (rear RH*1 or LH*2)
  2. Air conditioning harness assembly
  3. Air conditioning amplifier assembly

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System). Dtc B1458/58 Passenger Side Air Outlet Damper Control Servo Motor Circuit


INSPECTION PROCEDURE

1.READ VALUE USING GTS (AIR MIX DAMPER SERVO TARG PLS[P&R P], A/M SERVO ACTUAL PULSE[P&R P])
  1. *1: for LHD
  2. *2: for RHD

  1. Use the Data List to check if the air mix damper servo motor RH*1 or LH*2 is functioning properly (Click here).

    Air Conditioner
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Air Mix Servo Targ Pls(F&R P)
    		Air mix damper servo motor (rear RH*1 or LH*2) target pulse / Min.: 128, Max.: 383
    for LHD:
    1. MAX COLD: 161 (pulse)
    2. MAX HOT: 133 (pulse)
    for RHD:
    1. MAX COLD: 141 (pulse)
    2. MAX HOT: 169 (pulse)
    1. Displayed between 133 and 166 pulse (for LHD)
    2. Displayed between 141 and 169 pulse (for RHD)
    3. Air mix damper servo motor (rear RH*1 or LH*2) system malfunction
    A/M Servo Actual Pulse(F&R P)
    		Air mix damper servo motor (rear RH*1 or LH*2) actual pulse / Min.: 128, Max.: 383
    for LHD:
    1. MAX COLD: 161 (pulse)
    2. MAX HOT: 133 (pulse)
    for RHD:
    1. MAX COLD: 141 (pulse)
    2. MAX HOT: 169 (pulse)
    1. Displayed between 133 and 166 pulse (for LHD)
    2. Displayed between 141 and 169 pulse (for RHD)
    3. Air mix damper servo motor (rear RH*1 or LH*2) system malfunction
    OK:
    When the rear temperature adjust switch is turned from MAX COLD to MAX HOT, the actual pulse changes following the target pulse.
    Result
    Result
    		Proceed to
    Target pulse changes but actual pulse does not change
    		A
    Target pulse and actual pulse do not change
    		B
    Actual pulse changes following the target pulse (When troubleshooting according to the DTC)
    		C
    Actual pulse changes following the target pulse (When troubleshooting according to Problem Symptoms Table)
    		D


B
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY (Click here)

C
Go to step 4

E
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
A


2.CHECK AIR MIX DAMPER SERVO MOTOR (REAR FRONT PASSENGER SIDE)

  1. for LHD:

    1. Replace the air mix damper servo motor (rear RH) (Click here).

  1. for RHD:

    1. Replace the air mix damper servo motor (rear LH) (Click here).

HINT:
Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.

  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC B1458/58 is not output.


NG
Go to step 3
OK

END (AIR MIX DAMPER SERVO MOTOR [REAR FRONT PASSENGER SIDE] WAS DEFECTIVE)

3.CHECK AIR CONDITIONING HARNESS ASSEMBLY

  1. Replace the air conditioning harness assembly with a new or known good one.

    1. for LHD: Click here
    2. for RHD: Click here

  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC B1458/58 is not output.


NG
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY (Click here)
OK

END (AIR CONDITIONING HARNESS ASSEMBLY WAS DEFECTIVE)

4.CHECK FOR DTC

  1. Clear the DTCs (Click here ).

  1. Check for DTCs (Click here).

    OK:
    DTC B1458/58 is not output.


NG
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)