Camshaft Oil Control Valve Inspection

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
3Ur-Fe Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

Camshaft Oil Control Valve -- Inspection



1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		6.9 to 7.9 Ω
    If the result is not as specified, replace the oil control valve assembly.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.3Ur-Fe Engine Control.Sfi System.Camshaft Oil Control Valve Inspection

  1. Connect the battery positive (+) lead to terminal 1 and the negative (-) lead to terminal 2, and check the movement of the valve.

    OK:
    Condition
    		Specified Condition
    Battery positive (+) voltage is applied
    		Valve moves in left arrow direction shown in the illustration
    Battery positive (+) voltage is cut off
    		Valve moves in right arrow direction shown in the illustration
    Text in Illustration
    *a
    		Component without harness connected
    (Oil Control Valve)
    If the result is not as specified, replace the oil control valve assembly. If the valve cannot return properly because of foreign matter, a small pressure leak in the advanced direction may occur and a DTC may be output.