Multiplex Network Body Ecu Removal

Power Source Network. Land Cruiser. Urj200, 202 Grj200 Vdj200
Networking. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE REAR NO. 2 SEAT ASSEMBLY RH

  2. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

  3. REMOVE REAR STEP COVER

  4. REMOVE REAR DOOR SCUFF PLATE RH

  5. REMOVE REAR SEAT COVER CAP

  6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

  7. REMOVE NO. 2 MULTIPLEX NETWORK BODY ECU

Multiplex Network Body Ecu -- Removal



1. REMOVE REAR NO. 2 SEAT ASSEMBLY RH
(Click here)


2. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 6 clips and remove the rear floor mat support plate.



3. REMOVE REAR STEP COVER
HINT:
Use the same procedure for both rear step covers.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the rear step cover.



4. REMOVE REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


5. REMOVE REAR SEAT COVER CAP
HINT:
Use the same procedure for both No. 1 luggage compartment trim hooks.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Multiplex Network Body Ecu Removal

  1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *a
    		Protective Tape


6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
When removing the front quarter trim panel assembly RH, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 3 claws and remove the outer lap belt anchor cover.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and rear No. 1 seat belt anchor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Detach the 3 claws and remove the outer lap belt anchor cover.



      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Remove the bolt and rear No. 2 seat belt anchor.



  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Remove the clip and bolt.

    2. Detach the 16 clips and 2 claws.

    3. w/o Rear Air Conditioning System:
      Disconnect the rear seat lock control lever cable and then remove the front quarter trim panel assembly RH.



    4. w/ Rear Air Conditioning System:
      Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the front quarter trim panel assembly RH.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Multiplex Network Body Ecu Removal



  1. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:

    1. Remove the clip.



    2. Detach the 16 clips and 2 claws, and remove the front quarter trim panel assembly RH.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Multiplex Network Body Ecu Removal



  1. w/ Tonneau Cover:

    1. Remove the screw and clip.



    2. Detach the 16 clips and 2 claws, and remove the front quarter trim panel assembly RH.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Multiplex Network Body Ecu Removal



7. REMOVE NO. 2 MULTIPLEX NETWORK BODY ECU


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the 2 connectors.

  1. Remove the bolt and No. 2 multiplex network body ECU.