Multiplex Network Body Ecu Installation

Power Source Network. Land Cruiser. Urj200, 202 Grj200 Vdj200
Networking. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL NO. 2 MULTIPLEX NETWORK BODY ECU

  2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

  3. INSTALL REAR SEAT COVER CAP

  4. INSTALL REAR DOOR SCUFF PLATE RH

  5. INSTALL REAR STEP COVER

  6. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

  7. INSTALL REAR NO. 2 SEAT ASSEMBLY RH

Multiplex Network Body Ecu -- Installation


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).


1. INSTALL NO. 2 MULTIPLEX NETWORK BODY ECU

  1. Install the No. 2 multiplex network body ECU with the bolt.

  1. Connect the 2 connectors.



2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
When installing the front quarter trim panel assembly RH, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. w/o Rear Air Conditioning System:
      Connect the rear seat lock control lever cable.

    2. w/ Rear Air Conditioning System:
      Connect the thermistor connector and rear seat lock control lever cable.

    3. Attach the 16 clips and 2 claws to install the front quarter trim panel assembly RH.



    4. Install the clip and bolt.

      Torque:
      12 N*m{122 kgf*cm, 9 ft.*lbf}


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Multiplex Network Body Ecu Installation



  1. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:

    1. Attach the 16 clips and 2 claws to install the front quarter trim panel assembly RH.



    2. Install the clip.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Multiplex Network Body Ecu Installation



  1. w/ Tonneau Cover:

    1. Attach the 16 clips and 2 claws to install the front quarter trim panel assembly RH.



    2. Install the screw and clip.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Multiplex Network Body Ecu Installation



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m{428 kgf*cm, 31 ft.*lbf}


      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Attach the 3 claws to install the outer lap belt anchor cover.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the rear No. 1 seat belt anchor with the bolt.

    Torque:
    42 N*m{428 kgf*cm, 31 ft.*lbf}


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 claws to install the outer lap belt anchor cover.



3. INSTALL REAR SEAT COVER CAP
HINT:
Use the same procedure to install the rear seat cover cap on the other side.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 claws to install the rear seat cover cap.



4. INSTALL REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


5. INSTALL REAR STEP COVER
HINT:
Use the same procedure for both rear step covers.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the rear step cover.



6. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 6 clips to install the rear floor mat support plate.



7. INSTALL REAR NO. 2 SEAT ASSEMBLY RH
(Click here)