Dtc P0630 Vin Not Programmed Or Mismatch - Ecm / Pcm

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Vd-Ftv Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630)

INPUT VIN WITH GTS

DTC P0630 VIN not Programmed or Mismatch - ECM / PCM


DESCRIPTION

DTC P0630 is set when the Vehicle Identification Number (VIN) is not stored in the ECM or the input VIN is not accurate. Input the VIN with the GTS.

DTC No.
DTC Detection Condition
Trouble Area
P0630
VIN not stored in ECM or VIN input into ECM not accurate
(1 trip detection logic)
ECM

INSPECTION PROCEDURE

1.CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630)

  1. Connect an GTS to the DLC3.

  1. Turn the ignition switch to ON and turn the GTS ON.

  1. Enter the following menus: Engine and ECT / Trouble Codes.

  1. Read DTCs.

    Result:
    Display (DTC Output)
    		Proceed To
    P0630
    		A
    P0630 and other DTCs
    		B
    If any DTCs other than P0630 are output, troubleshoot those DTCs first.
    NOTICE:
    If P0630 is set, the VIN must be input to the ECM using the GTS. However, all DTCs are cleared automatically by the GTS when inputting the VIN. If DTCs other than P0630 are set, check them first.


B
GO TO DTC CHART (Click here)
A


2.INPUT VIN WITH GTS

  1. Refer to the registration (Click here).


NEXT

END