Door Control Switch Inspection

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Switch Condition	Specified Condition
2 (UL) - 3 (E)	Unlock	Below 1 Ω
2 (UL) - 3 (E)	Off	10 kΩ or higher
4 (L) - 3 (E)
4 (L) - 3 (E)	Lock	Below 1 Ω

1. If the result is not as specified, replace the door control switch assembly.
   

Apply battery voltage to the switch connector and check that the indicator (LED) illuminates.

OK:

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 1 (IG) Battery negative (-) → Terminal 3 (E)	Indicator (LED) illuminates