Wireless Door Lock Control System (W/ Entry And Start System) Data List / Active Test

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Door Lock. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. READ DATA LIST

  1. ACTIVE TEST

Wireless Door Lock Control System (W/ Entry And Start System) -- Data List / Active Test



READ DATA LIST
HINT:
Using the intelligent tester to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Data List.

  5. According to the display on the intelligent tester, read the Data List.

    Main Body
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    D Door Courtesy SW
    		Driver side door courtesy switch signal / ON or OFF
    		ON: Driver side door is open
    OFF: Driver side door is closed
    		-
    P Door Courtesy SW
    		Passenger side door courtesy switch signal / ON or OFF
    		ON: Passenger side door is open
    OFF: Passenger side door is closed
    		-
    RL Door Courtesy SW
    		Rear door courtesy switch LH signal / ON or OFF
    		ON: Rear side door LH is open
    OFF: Rear side door LH is closed
    		-
    RR Door Courtesy SW
    		Rear door courtesy switch RH signal / ON or OFF
    		ON: Rear side door RH is open
    OFF: Rear side door RH is closed
    		-
    Back Door Courtesy SW
    		Back door courtesy switch signal / ON or OFF
    		ON: Back door is open
    OFF: Back door is closed
    		-
    D Lock Pos switch
    		Driver side door lock position switch signal / ON or OFF
    		ON: Driver side door lock is unlocked
    OFF: Driver side door lock is locked
    		-
    P Lock Pos switch
    		Passenger side door lock position switch signal / ON or OFF
    		ON: Passenger side door is unlocked
    OFF: Passenger side door is locked
    		-
    RL Lock Pos switch
    		Rear door LH lock position switch signal / ON or OFF
    		ON: Rear side door LH is unlocked
    OFF: Rear side door LH is locked
    		-
    RR Lock Pos switch
    		Rear door RH lock position switch signal / ON or OFF
    		ON: Rear side door RH is unlocked
    OFF: Rear side door RH is locked
    		-
    Back Lock Pos switch
    		Back door lock position switch signal / ON or OFF
    		ON: Back door is unlocked
    OFF: Back door is locked
    		-

    Power Back (w/ Power Back Door System)
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Door lock status
    		Back door lock status signal / UNLOCK or LOCK
    		UNLOCK: Back door unlocked
    LOCK: Back door locked
    		-
    Wireless PBD SW Operation
    		Transmitter switch operation condition signal/1 time, 2 times, 0.8 sPR or OFF
    		Current customize setting displayed
    		-


ACTIVE TEST
HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Active Test.

  5. According to the display on the intelligent tester, perform the Active Test.

    Main Body
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Hazard
    		Turn signal flasher relay
    		ON or OFF
    		-
    Door Lock
    		All door lock motors
    		OFF or LOCK
    		-
    D-Door Unlock
    		Driver side door unlock motor
    		OFF or UNLOCK
    		-