Engine Switch Inspection

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
3Ur-Fe Starting. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT ENGINE SWITCH

Engine Switch -- Inspection



1. INSPECT ENGINE SWITCH


    Land Cruiser. Urj200, 202 Grj200 Vdj200.3Ur-Fe Starting.Starting System.Engine Switch Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    5 (SS1) - 6 (AGND)
    1 (SS2) - 6 (AGND)
    		Not pushed
    		10 kΩ or higher
    5 (SS1) - 6 (AGND)
    1 (SS2) - 6 (AGND)
    		Pushed
    		Below 1 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Engine Switch)
    If the result is not as specified, replace the engine switch.

  1. Apply battery voltage between the terminals of the switch, and check the illumination condition of the engine switch.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 9 (SWIL)
    Battery negative (-) → Terminal 6 (AGND)
    		Illuminates
    CAUTION:
    1. If the positive (+) lead and the negative (-) lead are incorrectly connected, the engine switch indicator will not illuminate.
    2. If the voltage is too low, the indicator will not illuminate.
    If the result is not as specified, replace the engine switch.