Cruise Control Main Switch Removal

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
Cruise Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE STEERING PAD

  4. REMOVE CRUISE CONTROL MAIN SWITCH

Cruise Control Main Switch -- Removal


HINT:
  1. Use the same procedures for LHD and RHD vehicles.
  2. The procedures listed below are for LHD vehicles.


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE STEERING PAD
(Click here)


4. REMOVE CRUISE CONTROL MAIN SWITCH


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Cruise Control.Cruise Control System.Cruise Control Main Switch Removal

  1. Disconnect the connector.

    Text in Illustration
    *a
    		Screw
    *b
    		Connector

  1. Remove the 2 screws.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the connector and remove the cruise control main switch wire.