Cruise Control Main Switch Installation

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
Cruise Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL CRUISE CONTROL MAIN SWITCH

  2. INSTALL STEERING PAD

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  4. CHECK SRS WARNING LIGHT

Cruise Control Main Switch -- Installation


HINT:
  1. Use the same procedures for LHD and RHD vehicles.
  2. The procedures listed below are for LHD vehicles.


1. INSTALL CRUISE CONTROL MAIN SWITCH

  1. Connect the connector to install the cruise control main switch wire.

  1. Install the cruise control main switch with the 2 screws.

    Torque:
    2.4 N*m{24 kgf*cm, 22 in.*lbf}

  1. Connect the connector.



2. INSTALL STEERING PAD
(Click here)


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


4. CHECK SRS WARNING LIGHT
(Click here)