Washer Nozzle (For Front Side) Removal

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Wiper Washer. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE UPPER RADIATOR SUPPORT SEAL

  4. REMOVE FRONT FENDER MAIN SEAL LH

  5. REMOVE FRONT FENDER MAIN SEAL RH

  6. REMOVE FRONT WIPER ARM HEAD CAP

  7. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

  8. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

  9. REMOVE HOOD TO COWL TOP SEAL

  10. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

  11. REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/o PTC Heater)

  12. REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/ PTC Heater)

Washer Nozzle (For Front Side) -- Removal


HINT:
  1. Use the same procedure for the LH and RH sides.
  2. The procedure listed below is for the LH side.


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE UPPER RADIATOR SUPPORT SEAL


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Washer Nozzle (For Front Side) Removal

  1. Remove the 7 clips and upper radiator support seal.

    Text in Illustration
    *A
    		for Gasoline
    *B
    		for Diesel


4. REMOVE FRONT FENDER MAIN SEAL LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 guides and 3 clips and remove the front fender main seal LH.



5. REMOVE FRONT FENDER MAIN SEAL RH
HINT:
Use the same procedure described for the LH side.


6. REMOVE FRONT WIPER ARM HEAD CAP


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 3 claws and remove the front wiper arm head cap.

    HINT:
    Use the same procedure for both front wiper arm head caps.


7. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the nut and the front wiper arm and blade assembly LH.



8. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the nut and the front wiper arm and blade assembly RH.



9. REMOVE HOOD TO COWL TOP SEAL


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a clip remover, detach the 12 clips, 4 clamps and remove the hood to cowl top seal.



10. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the washer hose.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 clips.

  1. Detach the 17 claws and remove the cowl top ventilator louver sub-assembly.



11. REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/o PTC Heater)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 3 claws and remove the washer nozzle.

  1. Disconnect the hose.



12. REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/ PTC Heater)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the connector clamp and disconnect the connector.

  1. Disconnect the hose.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws and remove the washer nozzle.