Front Wiper Motor Installation
INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY
INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
INSTALL HOOD TO COWL TOP SEAL
INSTALL FRONT FENDER MAIN SEAL LH
INSTALL FRONT FENDER MAIN SEAL RH
INSTALL UPPER RADIATOR SUPPORT SEAL
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH
INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH
INSTALL FRONT WIPER ARM HEAD CAP
Front Wiper Motor -- Installation |
- HINT:
- Use the same procedure for LHD and RHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY |
Using a T30 "TORX" socket, install the wiper motor with the 2 "TORX" screws.
- Torque:
- 7.5 N*m{76 kgf*cm, 66 in.*lbf}
Apply MP grease to the crank arm pivot of the windshield wiper motor assembly.
Install the No. 1 windshield wiper link rod to the crank arm pivot of the windshield wiper motor assembly.
Install the No. 2 windshield wiper link rod to the crank arm pivot of the windshield wiper motor assembly.
Install the wiper motor cover with the clamp.
| 2. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY |
Slide and attach the motor grommet to temporarily install the windshield wiper motor and link assembly as shown in the illustration.
Text in Illustration*1
| Motor Grommet
|
*a
| Slide
|
Install the windshield wiper motor and link assembly with the 3 bolts in the order indicated in the illustration.
- Torque:
- 7.0 N*m{71 kgf*cm, 62 in.*lbf}
Connect the connector.
| 3. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY |
Attach the 17 claws and 2 clips and install the cowl top ventilator louver sub-assembly.
| 4. INSTALL HOOD TO COWL TOP SEAL |
Attach the 12 clips and 4 clamps to install the hood to cowl top seal.
Install the washer hose.
| 5. INSTALL FRONT FENDER MAIN SEAL LH |
Attach the 3 clips and 2 guides to install the front fender main seal LH.
| 6. INSTALL FRONT FENDER MAIN SEAL RH |
- HINT:
- Use the same procedure described for the LH side.
| 7. INSTALL UPPER RADIATOR SUPPORT SEAL |
Install the upper radiator support seal with the 7 clips.
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 9. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH |
Stop the wiper motor at the automatic stop position.
Text in Illustration*a
| Wiper Arm Serrations
|
*b
| Wiper Pivot Serrations
|
Clean the wiper arm serration with a round file or equivalent.
Clean the wiper pivot serration.
Install the wiper arm and blade with the nut. Make sure that the wiper arm and blade comes to the position shown in the illustration.
Text in Illustration*a
| Moulding Edge
|
- Standard Measurement:
Position
| Specified Condition
|
A
| 16.8 to 36.8 mm (0.661 to 1.45 in.)
|
- Torque:
- 25 N*m{255 kgf*cm, 18 ft.*lbf}
- HINT:
- Hold down the wiper arm hinge with your hand while tightening the nut.
| 10. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH |
Stop the wiper motor at the automatic stop position.
Text in Illustration*a
| Wiper Arm Serrations
|
*b
| Wiper Pivot Serrations
|
Clean the wiper arm serration with a round file or equivalent.
Clean the wiper pivot serration.
Install the wiper arm and blade with the nut. Make sure that the wiper arm and blade comes to the position shown in the illustration.
Text in Illustration*a
| Moulding Edge
|
- Standard Measurement:
Position
| Specified Condition
|
A
| 20.0 to 40.0 mm (0.787 to 1.57 in.)
|
- Torque:
- 25 N*m{255 kgf*cm, 18 ft.*lbf}
- HINT:
- Hold down the wiper arm hinge with your hand while tightening the nut.
Operate the front wipers while spraying washer fluid on the windshield glass. Make sure that the front wipers function properly and there is no interference with the vehicle body.
| 11. INSTALL FRONT WIPER ARM HEAD CAP |
Attach the 3 claws and install the front wiper arm head cap.
- HINT:
- Use the same procedure for both front wiper arm head caps.
