Wiper And Washer System (W/O Rain Sensor) Data List / Active Test

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Wiper Washer. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PERFORM ACTIVE TEST

Wiper And Washer System (W/O Rain Sensor) -- Data List / Active Test



PERFORM ACTIVE TEST
HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Warm up the engine.

  2. Turn the ignition switch off.

  3. Connect the intelligent tester to the DLC3.

  4. Turn the ignition switch to ON.

  5. Turn the intelligent tester on.

  6. Enter the following menus: Body / (desired system) / Active Test.

  7. According to the display on the intelligent tester. perform the "Active Test".

    Main Body
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Head Light Cleaner
    		Headlight low beam signal
    		ON / OFF
    		-

    Body No. 4
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Front Washer Nozzle Heater
    		Washer nozzle heater operation
    		ON / OFF
    		-