Tire Pressure Warning Receiver Installation

Suspension. Land Cruiser. Urj200, 202 Grj200 Vdj200
Tire Pressure Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

  2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  4. REGISTRATION OF TRANSMITTER ID

  5. INSPECT TIRE PRESSURE WARNING SYSTEM

  6. PERFORM INITIALIZATION

Tire Pressure Warning Receiver -- Installation



1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

  1. Connect the connectors to the tire pressure warning ECU and receiver.

  1. Attach the guide and clamp to temporarily install the tire pressure warning ECU and receiver.

  1. Install the bolt.

    Torque:
    8.3 N*m{85 kgf*cm, 73 in.*lbf}


2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH
  1. w/o Sliding Roof: (Click here)
  2. w/ Sliding Roof: (Click here)


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


4. REGISTRATION OF TRANSMITTER ID
(Click here)


5. INSPECT TIRE PRESSURE WARNING SYSTEM
(Click here)


6. PERFORM INITIALIZATION
(Click here)